Your right, most of the QRM begins when a DX station fires up on 7030 and a
slew of US stations call and work and clobber the frequency. etc etc.
My solution is this; When I am on CW and get clobbered I switch in my
RTTY program. I then call him and TELL HIM the frequency is busy with CW.
And when I am ignored, which is the usual case I simply go back to CW and
clobber the hotel out of him for a while. They will normally move.
Unfortunately it don't work for long.
Dan/W4NTI
> [Original Message]
> From: K4SB <k4sb@bellsouth.net>
> To: SECC <secc@contesting.com>
> Date: 10/18/04 2:34:22 PM
> Subject: Re: [SECC] Re:JARTS
>
> ku8e@bellsouth.net wrote:
> > Is there a RTTY contest every weekend !!! It sure seems like it lately.
> > I sure would be nice if the activity didn't stray below 050 or so.
There were
> > stations at 030 on Friday night limiting the operating space for any CW
contests....
>
> Well, Jeff is speaking of 40 meters only. I have brought up this
> subject on the RTTY reflector, and suggested that at the very least,
> we use 7080 up for USA to USA.
>
> Unfortunately, RTTY in parts of the world other than the USA is
> generally permitted only from about 7030 to 7040, and in the last few
> contests, it seems the upper part of the band is just not used. I
> called CQ for at least 10 mins on 7084 and got not a single reply.
>
> Remember, if you can't beat us, join us. RTTY is really fun. Software
> is free, and all you need is a sound card and a couple of cables.
>
> 73
> Ed
> _______________________________________________
> SECC mailing list
> SECC@contesting.com
> http://lists.contesting.com/mailman/listinfo/secc
|