Hi John,
Go ahead and use GRITTY with your 1500-Hz filter. You will see more garbage on the screen when there is no signal, but decoding
accuracy will not be significantly degraded.
73 Alex VE3NEA
On 2015-04-15 10:09, John L Merrill wrote:
Unfortunately in some radios, like my TS-590, when in FSK(sorry I do not
like AFSK) mode, filter options are limited. In my case max filter width is
1500HZ.
73, John N1JM
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Jay WS7I
Sent: Wednesday, April 15, 2015 06:25
To: rtty@contesting.com
Subject: Re: [RTTY] GRITTY 1.2
Alex
Nice to see you making tools again. They are appreciated.
73 Jay WS7I
On 4/15/2015 5:57 AM, Alex, VE3NEA wrote:
Hi Peter,
Since GRITTY is not just a new application but a new technology, I did
not want to invest too much time in its bells and whistles until the
technology itself is tested and accepted by the RTTY community. In its
current state, the program has a minimalist user interface, it does
not even have a Settings dialog. I can add new features if they are
required for testing, such as waterfall resizing to fit GRITTY's
window on the conterster's screen, but other, 'nice to have' features
have to wait a little bit. Custom font size and colors is now on my
to-do list for the future versions, thank you for the idea.
The Data File section in the Help file contains some information about
the INI and other files used by the program. Until the Settings dialog
is added to the program, some settings may be changed only in the ini
file. This is currently undocumented as these options will be removed
in the future. One such option is default mark and space tones: you
can change them by changing the value of the DefaultHighTone parameter
in the ini file. This parameter sets the higher of the two tones, the
lower one is 170 Hz below it. Another option enables the Save Audio
and Play Back Audio buttons intended for debugging. To enable these
buttons, add the following lines at the bottom of Gritty.ini:
[Debug]
ExpertMode=1
73 Alex VE3NEA
On 2015-04-15 06:48, Peter L. Jackson wrote:
Hi Alex,
GRTTY 1.2 runs much better in this version.
Can you put in a drop down menu and or a tutorial in changing the INI
file.
The size of the decode print FONTS are very small for me.
From the Demo I take it you are using Linux; the pics show 2 new
ICONS (save and a open folder) on the tool bar that don't show up on
my Windows 7 64 Bit OS being used here ??
Thank you.
Peter
VK6KXW
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|