Unfortunately in some radios, like my TS-590, when in FSK(sorry I do not
like AFSK) mode, filter options are limited. In my case max filter width is
1500HZ.
73, John N1JM
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Jay WS7I
Sent: Wednesday, April 15, 2015 06:25
To: rtty@contesting.com
Subject: Re: [RTTY] GRITTY 1.2
Alex
Nice to see you making tools again. They are appreciated.
73 Jay WS7I
On 4/15/2015 5:57 AM, Alex, VE3NEA wrote:
> Hi Peter,
>
> Since GRITTY is not just a new application but a new technology, I did
> not want to invest too much time in its bells and whistles until the
> technology itself is tested and accepted by the RTTY community. In its
> current state, the program has a minimalist user interface, it does
> not even have a Settings dialog. I can add new features if they are
> required for testing, such as waterfall resizing to fit GRITTY's
> window on the conterster's screen, but other, 'nice to have' features
> have to wait a little bit. Custom font size and colors is now on my
> to-do list for the future versions, thank you for the idea.
>
> The Data File section in the Help file contains some information about
> the INI and other files used by the program. Until the Settings dialog
> is added to the program, some settings may be changed only in the ini
> file. This is currently undocumented as these options will be removed
> in the future. One such option is default mark and space tones: you
> can change them by changing the value of the DefaultHighTone parameter
> in the ini file. This parameter sets the higher of the two tones, the
> lower one is 170 Hz below it. Another option enables the Save Audio
> and Play Back Audio buttons intended for debugging. To enable these
> buttons, add the following lines at the bottom of Gritty.ini:
>
> [Debug]
> ExpertMode=1
>
>
> 73 Alex VE3NEA
>
>
>
>
>
>
> On 2015-04-15 06:48, Peter L. Jackson wrote:
>> Hi Alex,
>> GRTTY 1.2 runs much better in this version.
>>
>> Can you put in a drop down menu and or a tutorial in changing the INI
>> file.
>>
>> The size of the decode print FONTS are very small for me.
>>
>> From the Demo I take it you are using Linux; the pics show 2 new
>> ICONS (save and a open folder) on the tool bar that don't show up on
>> my Windows 7 64 Bit OS being used here ??
>>
>> Thank you.
>> Peter
>> VK6KXW
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|