On Nov 23, 2013, at 8:00 AM, Kai wrote:
> Again, to keep what we can do today, (up to the 300 baud RTTY with up to
> 1000 Hz shift) would require a bandwidth of
> 300+1.2(1000) = 1500 Hz. THAT is the current RTTY teleprinter mode limit
That is actually a darn good suggestion, and does not deviate from what we can
do today on FSK with the current regulations.
I.e., the narrowest 2 tone FSK bandwidth you can get by using the maximum
symbol rate and FSK shift that is allowed from the existing regulations.
This would include 850 Hz RTTY shift too, which will allow good experimentation
to further study selective fading.
Mind if I plagiarize that to include in my own comments to the FCC?
P.S. It would also de-legalize Pactor III and create a different religious
war. (Pactor III is 2K20J2D emission.)
73
Chen, W7AY
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|