This was pointed out a few years ago when multiple instances of MMTTY were
being used when a certain SoundBlaster soundcard was being used. It seems
like that that card cannot handle more than one application using it's audio
output. I would make sure you have the most current drivers for your
soundcard. You could also pick up one of the cheap under $10.00 USB
soundcards and see if that takes care of the problem..
73 Rick N2AMG
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of RLVZ@aol.com
Sent: Friday, June 07, 2013 11:22 PM
To: rtty@contesting.com
Subject: [RTTY] 2Tone problems
Hi Guys,
I'm finally setup with 2 RTTY Windows: MMTTY & 2Tone. And I've got a
couple of problems:
1) As soon as I added the 2Tone as my 2nd window, I noticed the audio level
on the MMTTY window dropped about two-thirds and MMTTY doesn't decode very
well anymore.
2) 2Tone decodes the received signals fine but only decodes my transmit
message about one-third of the time. Any ideas how I can get it to decode
my transmit message all the time?
Rig: K3 feeding a Windows 7 computer motherboard soundcard from the fixed
audio output jack on the rear of the K3.
Thanks!
Dick- K9OM
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|