To take it one step further, how about a network of SDR receivers with the
GUI available on the internet. Hint: they are out there already. The only
thing
I can see that may be a problem is standards for the rx end, i.e. filters,
preamp,
etc. This would give you realtime feedback on what your signal looks like at
some distant station. Anyone want to get on for a test I can also provide a
screenshot from PSDR or SDR# your choice or both.
Thanks Andy from your home grid :)
Ron
K0IDT
----- Original Message -----
From: "Bill Turner" <dezrat1242@yahoo.com>
To: "RTTY Reflector" <rtty@contesting.com>
Sent: Wednesday, January 09, 2013 2:50 PM
Subject: Re: [RTTY] RTTY Now trashy signals
ORIGINAL MESSAGE:
On Wed, 9 Jan 2013 09:03:08 -0800 (PST), K0SM/2 wrote:
Here's a very simple way that might get at the crux of the issue. Let's say that
signal number #3 was your signal (yes, this was recorded off the air this weekend,
and no, I'm not going to identify him or her publicly):
http://www.frontiernet.net/~aflowers/rtty_examples/
REPLY:
Wow... fascinating graphs, Andy. Great job!!
I wonder if somehow it might be possible to arrange on-the-air tests where a
person could transmit a few seconds of data and have a graph like those emailed
to them? A lot of work, I know, but could be extremely valuable.
Bill, W6WRT
_______________________________________________
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|