RTTY
[Top] [All Lists]

Re: [RTTY] RadioShack isolation transformer replacement

To: "RTTY" <rtty@contesting.com>
Subject: Re: [RTTY] RadioShack isolation transformer replacement
From: "Anthony Cioffi (N2KI)" <n2ki.ham@gmail.com>
Reply-to: n2ki.ham@gmail.com
Date: Wed, 4 Apr 2012 11:00:43 +0000
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Don, et al

I have used this product in between the sound card and the mixer board to 
effectively eliminate a ground loop. The only issue I had was having to use RCA 
to 1/4" phone plug adapter which is no big deal.  Price wise, they are more 
expensive than the original I.T. but just as effective.  


Anthony J Cioffi (N2KI)
Sent from BlackBerry

-----Original Message-----
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
Sender: rtty-bounces@contesting.com
Date: Tue, 3 Apr 2012 23:18:30 
To: 'RTTY'<rtty@contesting.com>
Subject: [RTTY] RadioShack isolation transformer replacement

Since I couldn't operate because of weather last night, I took time to 
fabricate a RadioShack audio isolation transformer that I had
in the junk drawer (was p/n 273-1374) into a small plastic project box with two 
RCA jacks so I could use it on a 2nd radio for JT65
AFSK transmission.

Today I decided to check the local RadioShack store to see if they still sold 
this transformer and I couldn't find it. I looked
online on their website and that part number is no longer valid and I could not 
find the transformer. Instead I found what they are
calling a "Ground Loop Isolator". I have a strong suspicion that it's basically 
the same thing built into an enclosure with leads
coming out of it with RCA audio plugs. It's on their website as p/n 270-054, 
shown here:

http://www.radioshack.com/product/index.jsp?productId=2062214

I wonder if anyone is using one of these to route audio to/from their PC to 
their radio? Seems like a slick solution. I need to
update my RTTY webpages if indeed this "Ground Loop Isolator" will replace the 
old audio isolation transformer. I read through all
the reviews. All but two were positive at getting rid of hum on audio but all 
were from those using it with sound systems and none
from hams. I see no reason why it wouldn't work for us hams.

The only problem I see with it, is that you would have to use an RCA female to 
1/8" phono plug adapter in order to plug it into your
PC sound card or else cut off the RCA plugs install your own 1/8" phono plugs.

Some of us still use homebrew interfaces and audio cables!

Thanks!

73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>