Delbert,
Forget about the power adjustment. That's 3db and QSB is almost always going
to be more than that. Better you run the full 100w
and give the guy on the other end some help with a bit better SNR.
73, Jeff ACØC
www.ac0c.com
-----Original Message-----
From: NQ4S - Delbert
Sent: Tuesday, January 25, 2011 2:19 PM
To: RTTY Contesting
Subject: Re: [RTTY] BARTG COMMENTS
Considering that I only had a spare hour to work BARTG it's no wonder I
didn't find you.
Thanks for the tips. I'm thinking of trying to run during CQ WPX RTTY next
month. My prefix should be fairly popular, so my potential in a run is
higher for this contest. My biggest issue with running is that my system
can transmit better than it can hear. In the past when I tried a run I
would call CQ but then I couldn't make out those responding. On the other
hand, when in S&P, if I hear someone they will usually be able to hear me.
I'm thinking of setting up my CQ macro to drop power back to only 50W, send
the CQ message, and then bring power back up to 100W for the exchange.
Sending at lower power will hopefully mean that I'll have a better chance of
hearing the stations which can hear me as they would need a better antenna
to pickup my signal in the first place.
Regarding the passband, that is a real problem for me as I'm limited to AFSK
right now. I need to build a custom interface to let me work FSK with my
SignaLink USB and TS-2000 and I don't think I'm going ot have a chance to do
that in the near future. In SSB mode my radio will only come down a 400Hz
filter window (1000Hz to 1400Hz) so I find myself adjusting my mark and
space close to the top or bottom of that window when I'm trying to work
around a close by signal. This won't be practial in run mode.
Delbert, NQ4S
http://nq4s.stuffofinterest.com/
On Tue, Jan 25, 2011 at 2:56 PM, Greg Rauch <ki6ck@sbcglobal.net> wrote:
> I worked you in Round Up... and missed you in BARTG.
>
> If ever there's a question about exchange or call, I ask for repeats.
> Usually not required unless there's nearby QRM.
>
> My main op mode is to run, and with the tribander at 30m up and 1.5k amp,
> that combo works good. Always an annoyance when someone slips into my
> receiver passband and starts calling CQ... which is why I usually park
> myself up high or down low in the band. That works good too, with your
> station setup. For example, try calling CQ around 7.085+, in a clear area,
> and see how it goes. Easier on 20, around 14.12 or thereabouts.
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|