Good points, Joe. I agree that the check mark should go away when you make
a change to an initial profile loaded from userpara.ini. There is an easy
middle ground, though. Take my preference for an example. I never use AFC
or NET. I always want them off. So, I go into the userpara.ini file and
set AFC=0 for all profiles. In this case, when I select any of the profiles
in MMTTY, a check mark should go by its name and stay there, since I am
doing no further parameter changes after a profile is loaded. I've just
redefined all the initial profiles by virtue of this AFC=0 edit I make to
the ini file.
Ed - W0YK
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of Joe Subich, W4TV
> Sent: Thursday, 13 January, 2011 18:56
> To: ed@w0yk.com
> Cc: 'Dave AA6YQ'; rtty@contesting.com
> Subject: Re: [RTTY] MMTTY AFC Bug
>
>
> Ed,
>
> You could suggest the change to JE3HHT (via JA7UDE) but to be
> correct any check mark would have to disappear as soon a any
> profile that included "AFC=ON" was loaded since MARK and
> SHIFT are part of the profile. In addition, the check mark
> would need to go away as soon as any button on the "Control
> panel" was activated, etc.
>
> In essence, recalling (loading) a profile only places MMTTY
> into a known starting point. While typically one does not
> change things like "type," "taps," "BW" on the fly but they
> would all invalidate a profile as well.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 1/13/2011 8:05 PM, Ed Muns wrote:
> > I was thinking of the far larger number of users of the three most
> > popular contest loggers (N1MM Logger, Win-Test and
> WriteLog) with integrated MMTTY.
> > Fixing this bug in MMTTY would benefit users of all these different
> > loggers at the same time. Unfortunately, WinWarbler is not
> a solution for them.
> >
> > However, improving the decoding capability of MMTTY is
> probably more
> > important to these and all users. Thanks for your efforts, and
> > results, in this regard.
> >
> > Ed - W0YK
> >
> >
> >
> >> -----Original Message-----
> >> From: rtty-bounces@contesting.com
> >> [mailto:rtty-bounces@contesting.com] On Behalf Of Dave AA6YQ
> >> Sent: Thursday, 13 January, 2011 13:27
> >> To: ed@w0yk.com; rtty@contesting.com
> >> Subject: Re: [RTTY] MMTTY AFC Bug
> >>
> >> +++ AA6YQ comments below
> >>
> >> -----Original Message-----
> >> From: rtty-bounces@contesting.com
> >> [mailto:rtty-bounces@contesting.com]On
> >> Behalf Of Ed Muns
> >> Sent: Thursday, January 13, 2011 7:49 AM
> >> To: rtty@contesting.com
> >> Subject: Re: [RTTY] MMTTY AFC Bug
> >>
> >>
> >>
> >> Dick, K7VC, asked:
> >>> Let me rephrase my question, Dave. If I don't recall what
> >> Profile I
> >>> selected, how can I determine what it is?
> >>
> >> Dave, AA6YQ, replied:
> >>>>> In standalone MMTTY, the only way I know of to do that is by
> >>>>>> comparing
> >>> your settings which those of each of the profiles.
> >>
> >> How difficult would it be for MMTTY to retain a "check" by the
> >> profile currently in use? This has bugged me for years
> now that the
> >> MMTTY profile menu selection UI does not follow Windows convention
> >> and show a check by the current selection.
> >>
> >>>>> I doubt it would be difficult, but my focus is on improving
> >>>>> MMTTY's
> >> decoding capabilities, not its user interface. As I've
> pointed out,
> >> WinWarbler makes it very easy to select a profile and know what
> >> profile is
> >> selected:
> >>
> >> <http://www.dxlabsuite.com/winwarbler/Profile.jpg>
> >>
> >>
> >> 73,
> >>
> >> Dave, AA6YQ
> >>
> >> _______________________________________________
> >> RTTY mailing list
> >> RTTY@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/rtty
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|
