Also, be sure the scope is running good where you can get your ellipses
tuned in good!
An hour to go!!!!
73, Harvey, KM4JA
diddle - diddle
----------------------------------------------------------------------
Message: 1
Date: Fri, 7 Jan 2011 17:44:29 -0800
From: "Tom Osborne"<w7why@frontier.com>
Subject: Re: [RTTY] 24 Hours before the Roundup
To: "RTTY"<rtty@contesting.com>
Message-ID:<FF1D231469B741969C7D5F55EDEDDCE3@Tom>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Just getting all the stuff set up for tomorrow.
Making up the log sheets, dupes sheets, lotsa extra pencils for logging.
Hope the old Model 15 and the TD holds up through the contest. Got the
range all adjusted for weak signal work. Fixed up the roller on the back to
roll up all the excess paper. Even put some new polar relays in the TU so
they won't be so noisy.
Ready to go!! 73
Tom W7WHY
------------------------------
Message: 2
Date: Fri, 07 Jan 2011 20:11:22 -0600
From: Robert Chudek - K0RC<k0rc@citlink.net>
Subject: Re: [RTTY] 24 Hours before the Roundup
To: rtty@contesting.com
Message-ID:<4D27C7CA.2030907@citlink.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Make sure you empty the chad box before you start. You don't want to
stop and deal with excessive chads when you have a good run going.
Disable the auto-start and make certain the end-of-line bell is polished
and sounding clear. Oh, and machine oil. I've found the 6 oz bottle sold
at Singer Sewing Machine dealers has been the best substitute for the
original TeleType(tm) brand.
UE de Bob - K?RC in MN
On 1/7/2011 7:44 PM, Tom Osborne wrote:
> Just getting all the stuff set up for tomorrow.
>
> Making up the log sheets, dupes sheets, lotsa extra pencils for logging.
>
> Hope the old Model 15 and the TD holds up through the contest. Got the
> range all adjusted for weak signal work. Fixed up the roller on the back to
> roll up all the excess paper. Even put some new polar relays in the TU so
> they won't be so noisy.
>
> Ready to go!! 73
> Tom W7WHY
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
------------------------------
Message: 3
Date: Fri, 7 Jan 2011 18:37:31 -0800
From: "Tom Osborne"<w7why@frontier.com>
Subject: Re: [RTTY] 24 Hours before the Roundup
To: "RTTY"<rtty@contesting.com>
Message-ID:<C5447F4F379F47D7BB0A6934EFA50444@Tom>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Naw, just let the chads fall on the floor. When it gets too deep, just make
the XYL come down and clean the shack. I always have to tell her to clean
the oil off her hands before she cooks dinner or opens my beer.
I've found the best lube is rendered out bear fat. 73 Bob and CU in the
tests RYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRY
Tom W7WHY
Make sure you empty the chad box before you start. You don't want to
stop and deal with excessive chads when you have a good run going.
Disable the auto-start and make certain the end-of-line bell is polished
and sounding clear. Oh, and machine oil. I've found the 6 oz bottle sold
at Singer Sewing Machine dealers has been the best substitute for the
original TeleType(tm) brand.
UE de Bob - K?RC in MN
On 1/7/2011 7:44 PM, Tom Osborne wrote:
> Just getting all the stuff set up for tomorrow.
>
> Making up the log sheets, dupes sheets, lotsa extra pencils for logging.
>
> Hope the old Model 15 and the TD holds up through the contest. Got the
> range all adjusted for weak signal work. Fixed up the roller on the back
> to
> roll up all the excess paper. Even put some new polar relays in the TU so
> they won't be so noisy.
>
> Ready to go!! 73
> Tom W7WHY
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
------------------------------
Message: 4
Date: Sat, 8 Jan 2011 02:45:18 +0000
From: Susan King<susan.k5du@gmail.com>
Subject: Re: [RTTY] 24 Hours before the Roundup
To: Tom Osborne<w7why@frontier.com>
Cc: RTTY<rtty@contesting.com>
Message-ID:
<AANLkTi=WbbDddEG7aMK1LJqPm_1q61ONgG1mfpxJHb-4@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Some XYLs are too busy making QSOs to clean the shack.
73, K5DU Susan
On Sat, Jan 8, 2011 at 2:37 AM, Tom Osborne<w7why@frontier.com> wrote:
> Naw, just let the chads fall on the floor. When it gets too deep, just
> make
> the XYL come down and clean the shack. I always have to tell her to clean
> the oil off her hands before she cooks dinner or opens my beer.
>
> I've found the best lube is rendered out bear fat. 73 Bob and CU in the
> tests RYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRY
>
> Tom W7WHY
>
>
> Make sure you empty the chad box before you start. You don't want to
> stop and deal with excessive chads when you have a good run going.
> Disable the auto-start and make certain the end-of-line bell is polished
> and sounding clear. Oh, and machine oil. I've found the 6 oz bottle sold
> at Singer Sewing Machine dealers has been the best substitute for the
> original TeleType(tm) brand.
>
> UE de Bob - K?RC in MN
>
>
> On 1/7/2011 7:44 PM, Tom Osborne wrote:
> > Just getting all the stuff set up for tomorrow.
> >
> > Making up the log sheets, dupes sheets, lotsa extra pencils for logging.
> >
> > Hope the old Model 15 and the TD holds up through the contest. Got the
> > range all adjusted for weak signal work. Fixed up the roller on the back
> > to
> > roll up all the excess paper. Even put some new polar relays in the TU
> so
> > they won't be so noisy.
> >
> > Ready to go!! 73
> > Tom W7WHY
> >
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
------------------------------
Message: 5
Date: Fri, 7 Jan 2011 23:22:43 -0500
From: "KE1JF-Tom"<ke1jf@cox.net>
Subject: Re: [RTTY] 24 Hours before the Roundup
To:<RTTY@contesting.com>
Message-ID:<2DEC1A31B71A472D845B50CD711F16B0@TomTHINK>
Content-Type: text/plain; charset="iso-8859-1"
All is fixed with the Frequency I think, I was going to use the Pro III but had
trouble with the CI-V settings in the software so I Upgraded N1MM to the latest
Version ( mine was 7.xx )& checked the TS-2000 transmitting into a dummy load&
decoding on the Pro III screen at the same exact frequency so that's ok now I
hope. I missed the practice sessions due to a hockey game I couldn't get out of
going to but after it I re-adjusted the A3S that was way too high in all 3
bands so I'll find out in the RU if everything is working as it should.
See you all in the contest& Many Thanks to all who emailed& helped me. Good
Luck,
73,
Tom, KE1JF
------------------------------
Message: 6
Date: Sat, 8 Jan 2011 19:42:39 +1300 (NZDT)
From: "Wes Printz, W3SE/ZL3TE"<w3se@dxer.com>
Subject: [RTTY] Fw: Re: WF1B CTY Update Runtime Error 216
To: rtty@contesting.com
Message-ID:<201982.64616.qm@web96005.mail.aue.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Hello,
?
Jim, AD1C asked me to forward this here.? I am not a list member so will not
see list replies.? Any one having the same issue?? I just tried with Ver
20100701, and did not receive the error.? The error comes with Ver 20101207.
?
73,
?
Wes, W3SE / ZL3TE
?
?
?
--- On Sat, 8/1/11, Jim Reisert AD1C<jjreisert@alum.mit.edu> wrote:
From: Jim Reisert AD1C<jjreisert@alum.mit.edu>
Subject: Re: WF1B CTY Update Runtime Error 216
To: w3se@dxer.com
Date: Saturday, 8, January, 2011, 7:10 PM
I don't have WF1B so I can't try this.
Which country file are you using with WF1B? ?Does the original country file
work OK?
Please post this to the RTTY reflector, as there is nothing I can do here.
- Jim
On Fri, Jan 7, 2011 at 10:25 PM, Wes Printz, W3SE/ZL3TE<w3se@dxer.com> wrote:
Hi Jim,
?
In attemting to update the CTY file for WF1B,?I had a Runtime Error 216 at
0004:0C 7.? The Blue box split the 0C | 7.
?
This error occurs when following the instructions and going to Step #5..? CQWW
and WAE.
When I select All other contests, it appears to work, and shows Sort complete.
?
This is in a Win 98SE Envrionment, I'll be using WF1B for RTTY RU, so should
not be too much of an issue for me.
?
73,
?
Wes, W3SE / ZL3TE
?
?
WF1B
Save WF1B.DAT to your WF1B RTTY folder
Run COUNTRY.EXE
Choose "Read CTY.DAT"
At "Identify the K1EA Country File(.DAT)", type in WF1B.DAT then CTRL-Enter
Select Contest Files: "Only CQWW& WAE"
Exit
?
?
?
--
Jim Reisert AD1C,<jjreisert@alum.mit.edu>, http://www.ad1c.us
------------------------------
Message: 7
Date: Sat, 8 Jan 2011 05:52:33 -0700
From: Jim Reisert AD1C<jjreisert@alum.mit.edu>
Subject: Re: [RTTY] Fw: Re: WF1B CTY Update Runtime Error 216
To: w3se@dxer.com
Cc: rtty@contesting.com
Message-ID:
<AANLkTi=Qvf7dw-mQUcJ_SV0CuB9Rbjpmagt7E-AWNhSX@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Fri, Jan 7, 2011 at 11:42 PM, Wes Printz, W3SE/ZL3TE<w3se@dxer.com> wrote:
> Hello,
>
> Jim, AD1C asked me to forward this here.? I am not a list member so will not
> see list replies.? Any one having the same issue?? I just tried with Ver
> 20100701, and did not receive the error.? The error comes with Ver 20101207.
I wasn't sure I could do this, but I installed DOSBOX and am able to
run WF1B on my Windows 7 PC, at least the country file program (and
RTTY, but no hardware connected etc.)
WF1B 5.02 says there are too many prefixes. I had thought the limit
was 1700, but it must be less than that. I'll see how I can fix this
for the next country file release.
73 - Jim AD1C
--
Jim Reisert AD1C,<jjreisert@alum.mit.edu>, http://www.ad1c.us
------------------------------
Message: 8
Date: Sat, 8 Jan 2011 14:52:50 +0100 (CET)
From: dj3iw@web.de
Subject: [RTTY] JT RTTY Contest?
To: RTTY@contesting.com
Message-ID:
<2055447153.7011635.1294494770811.JavaMail.fmail@mwmweb055>
Content-Type: text/plain; charset=UTF-8
Hello,
lots of JT RTTY contest activity on 20m at this time (1350 UTC).
Is today the correct date? Several sources say correct date to
be 15 January.
73 de Goetz, DJ3IW
___________________________________________________________
Neu: WEB.DE De-Mail - Einfach wie E-Mail, sicher wie ein Brief!
Jetzt De-Mail-Adresse reservieren: https://produkte.web.de/go/demail02
------------------------------
Message: 9
Date: Sat, 8 Jan 2011 10:31:49 -0500
From: "Scott Long"<k8sm@windstream.net>
Subject: [RTTY] ARRL RU band changes?
To:<RTTY@CONTESTING.COM>
Message-ID:<00.F3.11212.363882D4@pacmmta53>
Content-Type: text/plain; charset="us-ascii"
Is there a limit to band changes in a certain timeframe for single-op
unassisted?
Scott, K8SM
------------------------------
Message: 10
Date: Sat, 8 Jan 2011 10:39:46 -0500
From: "KE1JF-Tom"<ke1jf@cox.net>
Subject: Re: [RTTY] ARRL RU band changes?
To:<RTTY@contesting.com>
Message-ID:<525C1AB991A647FA80A380F741980F44@TomTHINK>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
6 Band Changes in one hour, " Band Changes are defined so that, for example,
a change from 20 meters 15 meters and back to 20 meters constitutes two band
changes ".
Tom, KE1JF
--------------------------------------------------
From: "Scott Long"<k8sm@windstream.net>
Sent: Saturday, January 08, 2011 10:31 AM
To:<RTTY@CONTESTING.COM>
Subject: [RTTY] ARRL RU band changes?
> Is there a limit to band changes in a certain timeframe for single-op
> unassisted?
>
>
>
> Scott, K8SM
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
------------------------------
Message: 11
Date: Sat, 08 Jan 2011 09:40:45 -0600
From: Sid Ashen-Brenner<sashen@swbell.net>
Subject: Re: [RTTY] ARRL RU band changes?
To: rtty@contesting.com
Message-ID:<4D28857D.8000708@swbell.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
http://www.arrl.org/files/file/Contest%20Rules%20PDFs/2011/2011_RTTY_Rules.pdf
n0obm
On 1/8/2011 9:31 AM, Scott Long wrote:
> Is there a limit to band changes in a certain timeframe for single-op
> unassisted?
>
>
>
> Scott, K8SM
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
------------------------------
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
End of RTTY Digest, Vol 97, Issue 17
************************************
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|