As mentioned elsewhere 400 Hz is the minimum when in SSB mode and yes I'm
working AFSK. I have a SignaLink USB which is great for minimizing the
cabling back ot the PC but does have the limitation of not supporting manual
PTT and FSK keying.
I'm toying with the idea of building a custom interface to let me use the
SignaLink with FSK and PTT keying via the TS-2000's ACC2 port. I have the
design posted on the SignaLink discussion group now to make sure I'm not
missing anything. Don't know if I'll have it ready to go by CQ WPX RTTY
next month but I can always hope..
On Tue, Jan 11, 2011 at 12:01 PM, Andy Swiffin <a.l.swiffin@dundee.ac.uk>wrote:
> >>> On 10/01/2011 at 16:34, in message
> <AANLkTinYd341rbXMHJgYP+uLgpLo_CATfjRGT7p5zt=U@mail.gmail.com>, NQ4S
> <NQ4S@arrl.net> wrote:
> > Those of us without a narrow filter (minimum 400 Hz on my TS-2000)
> > appreciate every bit of spread between signals. Far too many times I'd
> be
> > trying to work one signal when another would come up less than 100Hz away
> > and drown it out.
>
>
> How only 400hz? My Ts2000 goes down to 250hz in FSK (please tell me
> you're not using AFSK!)
>
> I'm using a g4zlp digimaster pro+ interface and with the ts2000 that gives
> me CW FSK, CAT and Audio for PSK or the SSB DVK all from one USB port (and
> the soundcard) on my laptop. True FSK with the ts2000 is such a delight to
> use after what I used to put up with!
>
> Regards
> Andy
> gm8oeg
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|