RTTY
[Top] [All Lists]

Re: [RTTY] RTTY contest questions and comments

To: "Robert Chudek - K0RC" <k0rc@citlink.net>, "Amos, Ian" <ian.amos@sap.com>, "Claude Du Berger" <duberger.miousse81@globetrotter.net>, <rtty@contesting.com>
Subject: Re: [RTTY] RTTY contest questions and comments
From: Jerry Flanders <jeflanders@comcast.net>
Date: Wed, 30 Sep 2009 13:33:28 -0400
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
No - not editing on the fly - assembling the 
transmitted string from several macros on the 
fly. If my f2 has "HISCALL 599 05 05 SC SC " and 
my f4 has " W4UK " and my f5 has HISCALL, I have 
the choice of sending f2 with no calls at the end 
(for when condx are good but also busy), adding 
my call under normal condx, or adding his call if 
I think that is best. I do this with combinations 
of f2, f4, and f5. If I hit f5 while f2 is still 
playing, they go out as one string.

I gave a more detailed report of how this works 
and the exact macros I use here yesterday.

Will N1MM (or other programs) let you make up one 
long transmitted string by pressing one macro 
button and then another before the first plays out? It is incredibly useful.

Jerry W4UK

At 12:24 PM 9/30/2009, Robert Chudek - K0RC wrote:
>Yes, you can edit macros "on the fly" in N1MM 
>Logger. (Right click on any macro button.)
>
>When I make a RTTY contesting presentation, I 
>make a point about changing bands (80m vs. 20m), 
>changing propagation (a pipeline vs. signals in 
>the noise), and even the portion of the contest 
>(beginning vs. end) make a difference in the most effective macros.
>
>As a RTTY operator gains contesting experience, 
>they will learn to change the macro content to 
>optimize for the current conditions. Macros 
>should not be chiseled in stone! Editing them 
>only takes a few seconds. I queue up a couple of 
>CQ's and make my changes during that period of time.
>
>73 de Bob - KØRC in MN
>
>
>----- Original Message ----- From: "Jerry Flanders" <jeflanders@comcast.net>
>To: "Amos, Ian" <ian.amos@sap.com>; "Claude Du 
>Berger" <duberger.miousse81@globetrotter.net>; <rtty@contesting.com>
>Sent: Wednesday, September 30, 2009 10:07 AM
>Subject: Re: [RTTY] RTTY contest questions and comments
>
>
>>But different conditions would favor different variations. I think
>>one macro for (HISCALL exchange) and then separate macros containing
>>only (HISCALL) and (MYCALL) give the most flexibility. Then just put
>>them together (or even leave out the last call for some Qs) at tx time.
>>
>>Don't all contest programs allow macros to be "assembled" from
>>different function keys on the fly? Maybe n1mm does not?
>>
>>Jerry W4UK
>>
>>At 10:23 AM 9/30/2009, Amos, Ian wrote:
>>>Ah there is the difference .... I use the reply (HISCALL) exchange
>>>(MYCALL).  This reason I do this as it let others know I am the run
>>>station so they stick around to work me or can move on faster if
>>>that have already logged me.  As usual there are many different
>>>styles of operating to be used
>>>
>>>73, Ian VE3JI
>>>
>>>________________________________
>>>From: Claude Du Berger [mailto:duberger.miousse81@globetrotter.net]
>>>Sent: Wednesday, September 30, 2009 10:14 AM
>>>To: Amos, Ian; rtty@contesting.com
>>>Subject: Re: [RTTY] RTTY contest questions and comments
>>>
>>>When I am in  RUN-CQ mode, I always reply with (Hiscall) exch. (Hiscall)
>>>because If there are many callers, QRM, it is important to confirm to
>>>whom I have sent the exchange. ex: Hiscall 599 001 001 Hiscall
>>>Then, I confirm with (TU Hiscall de MYCALL CQ)  Why send it again...
>>>Already sent twice...
>>>
>>>73, Claude VE2FK
>>>----- Original Message -----
>>>From: Amos, Ian<mailto:ian.amos@sap.com>
>>>To: rtty@contesting.com<mailto:rtty@contesting.com>
>>>Sent: Wednesday, September 30, 2009 10:00 AM
>>>Subject: [RTTY] RTTY contest questions and comments
>>>
>>>I agree with Bill the CALL TU helps me make sure I have the QSO, as
>>>I have been caught a few times. This a little slower but I believe
>>>it improves my log accuracy overall.
>>>
>>>Ian
>>>VE3JI
>>>
>>>
>>>
>>> >Another comment..... after the exchange it helps band sweepers if
>>>you send TU N6PE or QSL N6PE instead of N6PE TU or N6PE QSL because
>>>they can move as soon as they see the T or the Q
>>>
>>>REPLY:
>>>
>>>I do it as N6PE TU because often there will be two stations, both of
>>>whom think
>>>they worked me. If I do the TU first, they 
>>>will both be gone, but only one is
>>>really in the log. Sending the call sign first 
>>>gives them both a look at who I
>>>really logged.
>>>
>>>73, Bill W6WRT
>>>
>>>
>>>_______________________________________________
>>>RTTY mailing list
>>>RTTY@contesting.com<mailto:RTTY@contesting.com>
>>>http://lists.contesting.com/mailman/listinfo/rtty
>>>_______________________________________________
>>>RTTY mailing list
>>>RTTY@contesting.com
>>>http://lists.contesting.com/mailman/listinfo/rtty
>>
>>_______________________________________________
>>RTTY mailing list
>>RTTY@contesting.com
>>http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>