During the Anarts:
I was not sure anymore if I was
correct to call a station with only (de VE2FK VE2FK)
I was not sure if I should as many use (UR) and (BK)
I was not sure if I should only send my UTC as 2345
I was not sure if I should forget the rules and send
my CQ Zone before the TIME...
I was not sure if I should CFM with the received exch.
I was not sure if I should repeat the received station
call and say TU plus TNX and 73 at the end...
I was wondering why I have {ENTER} to begin a macro
and only a SPACE at the end...
Had fun
73 de Claude VE2FK
----- Original Message -----
From: Tom Osborne
To: RTTY
Sent: Sunday, June 10, 2007 12:34 AM
Subject: [RTTY] Anarts exchanges
Hi All
Been working the ANARTS here and one thing that has me wondering.
How are WL and some of the other loggers configured for exchange entry in
the logging window for the ANARTS contest? Here is an excerpt from the
rules: "MESSAGES: To consist of RST, Time UTC, and CQ Zone."
I get some that way, but a lot with zone first then time. N1MM Logger has
time, then zone for the entry windows, like the rules say. Luckily it will
accept the info either way as long as the zone is pre-filled.
We should get a consistant way of doing this so we will all be sending the
same exchange. 73 and CU in the contest.
Tom W7WHY
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|