Can someone check a couple of things in their system for me?
- Look at the device manager under resources for your sound card and tell me
what configuration you have for your sound card.
- Look in your autexec.bat file and tell me what the SET BLASTER statement
reads.
I can not get the software to recognize the soundcard in DOS.
Thanks
Tony - N2KI
SYSOP - N2KI DX CLUSTER
dxc.n2ki.com:7300
RF Gateway 145.650
Website: www.n2ki.com
DX Spoken Here
> -----Original Message-----
> From: Bill Turner [mailto:dezrat1242@ispwest.com]
> Sent: Friday, 22 October, 2004 11:58
> To: n2ki@amsat.org
> Subject: Re: [RTTY] RITTY 4.5 Issue
>
> On Thu, 21 Oct 2004 14:04:54 -0400, A.J. Cioffi wrote:
>
> >Bill,
> >
> >When I start in a DOS prompt and try to run the program, I get "SET
> Blaster
> >statement missing". It's in the autoexec.bat file so where else does it
> >want to see it?
> >
> >Tony
>
> _________________________________________________________
>
> That is the correct place for it. I can think of only two
> possibilities:
>
> 1. The SET BLASTER statement has one or more wrong values.
>
> 2. The driver for the soundcard is missing or corrupted.
>
> I'm not a great expert with this kind of thing so the real problem
> might be something else, but I'd check those things first.
>
> --
> 73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|