You only need a Set blaster statement in autexec.bat.
No driver at all is needed if you have a true soundblaster
ISA board.
In fact you need no operating system at all.
I have made a diskett that contains config.sys , Autoexec.bat
and RiTTY and nothing else. It runs fine on PCs without hard
drive.
Well, the diskett must be a bootable diskett.
I don't think config.sys is necessary, but I need it to
be able to handle my Swedish keyboard. And also keyb.com,
keyboard.sys and country.sys, just to be Swedish.
I run Win98SE and Ritty 4.53 in my computer since many years.
73's de Jan
> John Cashen wrote:
> > I use Win98SE and run RITTY 4.5 with no problems. The manual
provided with
> > RITTY spells out the set up using a Soundblaster sound board
including the
> > statement to put into Autoexec.bat. I don't think it is a
driver issue.
>
> Usually, this statement is automatically inserted, but
basically, it
> merely sets the sound card address, irq, and something else I
can't
> remember.
>
> > You must have a Soundblaster ISA board, RITTY won't work on a
Soundblaster
> > PCI board. Unless your computer has a motherboard with a
legacy ISA slot
> > you may never get RITTY to play again.
>
> Well, don't hold my feet to the fire for this, but I seem to
remember
> the Turtle Beach card has DOS drivers on the CD.
>
> 73
> Ed
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|