Thanks for the feedback, Jim. I'm not surprised that both ends were
needed. Suggests either a common mode problem on both ends or that it
simply needed another 6dB of choking.
73, Jim K9YC
On 5/22/2025 2:00 PM, Jim McCook wrote:
For now the RFI on the new digital LG TV has been stopped. The solution
was a type 31 one inch ID snap-on toroid with 4 turns on EACH end of the
25' HDMI cable between the new digital receiver and the TV. One toroid
on either end was not sufficient. None of this was necessary with the
previous units, which were android units. The same cables were used in
the new installation. None of the receiver peripherals were changed.
All speaker leads had previously been wrapped on 1-5/8 ID type 31
toroids. I still wish I had the old android units. 73, Jim
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|