To be specific the solaredge optimizer device has to be removed from the
back of the solar panel.
On Nov 12, 2017 12:28 PM, "Jim Brown" <jim@audiosystemsgroup.com> wrote:
> On 11/12/2017 12:07 PM, Mike Kirkland wrote:
>
>> Actually the FCC has proved turning the system off is ineffective at
>> eliminating the interference and the system must be disassembled.
>>
>
> Interesting -- the question is, HOW and WHAT was turned off? There are (at
> least) two components/functions of solar power systems that can generate
> RFI. One is charge regulation, which prevents batteries from being
> overcharged. Another is power inversion from DC to AC. In both cases, it
> is failure to suppress the generation and radiation of RF components of
> pulsed currents and rectangular waves. It is quite well known that
> excessively fast rise times, poor circuit design, and poor
> wiring/installation techniques increase the strength of these components
> and cause them to be radiated.
>
> If, for example, inverters were turned off but charge regulators were
> still functioning, they could still be generating noise.
>
> Another possibility is that improper bonding by the installation company
> might be causing noise present on the mains power system to be radiated.
>
> QST published an interesting piece a few years ago detailing the heroic
> efforts required to suppress a really bad system.
>
> 73, Jim K9YC
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|