But is there
a supported way to remotely upgrade the Bin to these boards?
Rick Snider, PE
Hillcountry Networks
Texas Rural Internet Engineering
------------------------------
Message: 6
Date: Wed, 8 Dec 2004 21:57:44 +0100
From: "Dzevad Hadzic" <zex@zex.biz>
Subject: RE: [Karlnet] RE: 4.46 released
To: <blair@wmwisp.net>, "'Karlnet Mailing List'"
<karlnet@WISPNotes.com>
Message-ID: <20041208205754.4A8F4F2806@paris.akorn.net>
Content-Type: text/plain; charset="us-ascii"
Did you upgrade your unit's and is everyhintg ok?
-----Original Message-----
From: Blair Davis [mailto:blair@wmwisp.net]
Sent: Wednesday, December 08, 2004 6:22 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] RE: 4.46 released
I am using 4.46 on my AP-1000E / Wavepoint II-E units. No
special problems found so far.
DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
connector) unless you want to go replace / reload the unit.
It WILL cause the unit to lock up.
Preparing to load 4.46 on my flashroms and on my OR-500 /
OR-2 and RG-1x00 units later today.
Blair Davis
West Michigan Wireless ISP
269-686-8648
A Division of :
Camp Communication Services, INC
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
------------------------------
Message: 7
Date: Thu, 9 Dec 2004 09:01:29 +1100
From: "Brenden Cooper" <brenden@megalink.com.au>
Subject: [Karlnet] 4.46 test
To: <karlnet@WISPNotes.com>
Message-ID: <004201c4dd71$795e4280$c85d20cb@s>
Content-Type: text/plain; charset="us-ascii"
I have put on the 4.46 vision on to a base that had a big problem with
lock ups.
So far so good, it hasn't lock up since installed.
Brenden
Megalink Aust
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of
karlnet-request@WISPNotes.com
Sent: Thursday, 9 December 2004 4:01 AM
To: karlnet@WISPNotes.com
Subject: Karlnet Digest, Vol 24, Issue 5
Send Karlnet mailing list submissions to
karlnet@WISPNotes.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.wispnotes.com/mailman/listinfo/karlnet
or, via email, send a message with subject or body 'help' to
karlnet-request@WISPNotes.com
You can reach the person managing the list at
karlnet-owner@WISPNotes.com
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Karlnet digest..."
Today's Topics:
1. RE: 4.46 released (Dzevad Hadzic)
----------------------------------------------------------------------
Message: 1
Date: Wed, 8 Dec 2004 02:35:26 +0100
From: "Dzevad Hadzic" <zex@zex.biz>
Subject: RE: [Karlnet] 4.46 released
To: "'TerabeamTechnical Services'" <techsupport@terabeam.com>,
"'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Message-ID: <20041208013540.85E83F285E@paris.akorn.net>
Content-Type: text/plain; charset="us-ascii"
Did anybody tested 4.46 ?
Btw seems that terabeam website is very long time down...
------------------------------
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
End of Karlnet Digest, Vol 24, Issue 5
**************************************
------------------------------
Message: 8
Date: Wed, 08 Dec 2004 17:36:53 -0700
From: "Caleb Carroll" <karlnet@pathcom.ca>
Subject: Re: [Karlnet] RE: 4.46 released
To: blair@wmwisp.net, "Karlnet Mailing List" <karlnet@WISPNotes.com>,
karlnet@WISPNotes.com
Message-ID: <200412081736530853.1B1F20EB@mail.pathcom.ca>
Content-Type: text/plain; charset="ISO-8859-1"
Read the bloody e-mail from Reg. It says:
***
Known Issue:
1) AP-1000 units with boot version 3.20 should not be upgraded to
versions
higher than 4.44-02.
***
AP-1000's with BNC connectors all have 3.20 boot prom.
*********** REPLY SEPARATOR ***********
On 2004-12-08 at 12:21 PM Blair Davis wrote:
I am using 4.46 on my AP-1000E / Wavepoint II-E units. No special
problems found so far.
DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
connector) unless you want to go replace / reload the unit. It WILL
cause the unit to lock up.
Preparing to load 4.46 on my flashroms and on my OR-500 / OR-2 and
RG-1x00 units later today.
Blair Davis
West Michigan Wireless ISP
269-686-8648
A Division of :
Camp Communication Services, INC
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
------------------------------
Message: 9
Date: Thu, 9 Dec 2004 02:05:30 +0100
From: "Dzevad Hadzic" <zex@zex.biz>
Subject: [Karlnet] How do you ppl check noise floor
To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Message-ID: <20041209010535.711F2F26F8@paris.akorn.net>
Content-Type: text/plain; charset="us-ascii"
I recently had problem with setuping long link ~20 miles. After setting