Have you pointed a spectrum analyzer at the CPE that is retransmitting?
*********** REPLY SEPARATOR ***********
On 2004-12-09 at 12:00 PM Dan Metcalf wrote:
>I still see IP Freeze w/ v4.46, over 1000 retransmits within a minute or
>two to a single CPE while the rest of the CPE's get NO activity
>
>
>Ryan Free wrote:
>
>>If anyone would like to see screen shots of the "IP Freeze" at work on an
>>STG graph feel free to contact me off list. Very interesting to see how a
>>graph can help depict an issue at hand. I also have a small write up as
>>well.
>>
>>
>>
>>Thanks,
>>Ryan Free
>>Network Consultant
>>OnlyInternet.Net Broadband & Wireless
>>www.oibw.net
>>Broadband Dpt. (800)363-0989
>>Desk: (800)363-4881 Ext. 2487
>>Nextel: (260)307-0018
>>
>>
>>-----Original Message-----
>>From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]
>>On Behalf Of karlnet-request@WISPNotes.com
>>Sent: Wednesday, December 08, 2004 8:06 PM
>>To: karlnet@WISPNotes.com
>>Subject: Karlnet Digest, Vol 24, Issue 6
>>
>>Send Karlnet mailing list submissions to
>> karlnet@WISPNotes.com
>>
>>To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>>or, via email, send a message with subject or body 'help' to
>> karlnet-request@WISPNotes.com
>>
>>You can reach the person managing the list at
>> karlnet-owner@WISPNotes.com
>>
>>When replying, please edit your Subject line so it is more specific
>>than "Re: Contents of Karlnet digest..."
>>
>>
>>Today's Topics:
>>
>> 1. RE: 4.46 released (Blair Davis)
>> 2. RE: RE: 4.46 released (Guillermo Bricaire)
>> 3. RE: 4.46 released (Rick Harnish)
>> 4. RE 4.46 - WaveLan II BNC (Rick Snider)
>> 5. Upgrading to 4.46 - Remotely (Rick Snider)
>> 6. RE: RE: 4.46 released (Dzevad Hadzic)
>> 7. 4.46 test (Brenden Cooper)
>> 8. Re: RE: 4.46 released (Caleb Carroll)
>> 9. How do you ppl check noise floor (Dzevad Hadzic)
>>
>>
>>----------------------------------------------------------------------
>>
>>Message: 1
>>Date: Wed, 08 Dec 2004 12:21:50 -0500
>>From: Blair Davis <blair@wmwisp.net>
>>Subject: [Karlnet] RE: 4.46 released
>>To: karlnet@WISPNotes.com
>>Message-ID: <41B7382E.6030701@wmwisp.net>
>>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>>I am using 4.46 on my AP-1000E / Wavepoint II-E units. No special
>>problems found so far.
>>
>>DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
>>connector) unless you want to go replace / reload the unit. It WILL
>>cause the unit to lock up.
>>
>>Preparing to load 4.46 on my flashroms and on my OR-500 / OR-2 and
>>RG-1x00 units later today.
>>
>>Blair Davis
>>West Michigan Wireless ISP
>>269-686-8648
>>
>>A Division of :
>>Camp Communication Services, INC
>>
>>
>>
>>
>>------------------------------
>>
>>Message: 2
>>Date: Wed, 8 Dec 2004 09:48:57 -0800
>>From: "Guillermo Bricaire" <gbricaire@bricaire.com>
>>Subject: RE: [Karlnet] RE: 4.46 released
>>To: <blair@wmwisp.net>, "'Karlnet Mailing List'"
>> <karlnet@WISPNotes.com>
>>Message-ID: <000601c4dd4e$3ecd0e30$6401a8c0@wiwo>
>>Content-Type: text/plain; charset="iso-8859-1"
>>
>>Thanks for that info!!
>>
>>-----Original Message-----
>>From: karlnet-bounces@WISPNotes.com
>>[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Blair Davis
>>Sent: Miircoles, 08 de Diciembre de 2004 09:22 a.m.
>>To: karlnet@WISPNotes.com
>>Subject: [Karlnet] RE: 4.46 released
>>
>>I am using 4.46 on my AP-1000E / Wavepoint II-E units. No special
>>problems found so far.
>>
>>DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
>>connector) unless you want to go replace / reload the unit. It WILL
>>cause the unit to lock up.
>>
>>Preparing to load 4.46 on my flashroms and on my OR-500 / OR-2 and
>>RG-1x00 units later today.
>>
>>Blair Davis
>>West Michigan Wireless ISP
>>269-686-8648
>>
>>A Division of :
>>Camp Communication Services, INC
>>
>>
>>_______________________________________________
>>Karlnet mailing list
>>Karlnet@WISPNotes.com
>>http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>>
>>
>>
>>
>>------------------------------
>>
>>Message: 3
>>Date: Wed, 8 Dec 2004 12:54:51 -0500
>>From: "Rick Harnish" <wireless@onlyinternet.net>
>>Subject: RE: [Karlnet] 4.46 released
>>To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
>>Message-ID: <200412081754.iB8Hss4x002640@smtpgw.onlyinternet.net>
>>Content-Type: text/plain; charset="us-ascii"
>>
>>I have been using the beta 4.46 release for six months. I have had very
>few
>>issues with it since we uploaded it. I went from having about 4 IP
>freezes
>>a day to maybe 1 per month. We plan to start transitioning our older
>>firmware to the new release over the course of the next few weeks.
>>
>>Rick Harnish
>>President
>>OnlyInternet Broadband & Wireless, Inc.
>>260-827-2482 Office
>>www.oibw.net
>>rharnish@oibw.net
>>MSN: r_harnish62@hotmail.com
>>ICQ: 293578162
>>Founding Member of WISPA
>>
>>
>>-----Original Message-----
>>From: Dzevad Hadzic [mailto:zex@zex.biz]
>>Sent: Tuesday, December 07, 2004 8:35 PM
>>To: 'TerabeamTechnical Services'; 'Karlnet Mailing List'
>>Subject: RE: [Karlnet] 4.46 released
>>
>>Did anybody tested 4.46 ?
>>Btw seems that terabeam website is very long time down...
>>
>>
>>
>>
>>
>>
>>
>>------------------------------
>>
>>Message: 4
>>Date: Wed, 8 Dec 2004 12:24:20 -0600
>>From: "Rick Snider" <rick@snider.org>
>>Subject: [Karlnet] RE 4.46 - WaveLan II BNC
>>To: <karlnet@WISPNotes.com>
>>Message-ID: <FIEJKNBFHPMNGAPPNMADMELGDBAA.rick@snider.org>
>>Content-Type: text/plain; charset="iso-8859-1"
>>
>>
>>Where Can I download a release for AP1000 TurboCell
>>ISP Binary that will work -- I have trashed two of these units
>>by trying to load 4.45 and was told to wait for 4.46 --- now
>>it looke like I need to locate an older Bin file like a 4.43
>>
>>Also If I pull a new License Key from License It -- based on the Mac
>>Address -- will it work with the older binary?
>>
>>If not who can provide me with working binary - license key combination.
>>
>>Rick Snider, PE
>>Hillcountry Networks
>>Texas Rural Internet Engineering
>>
>>
>>
>>------------------------------
>>
>>Message: 5
>>Date: Wed, 8 Dec 2004 12:35:43 -0600
>>From: "Rick Snider" <rick@snider.org>
>>Subject: [Karlnet] Upgrading to 4.46 - Remotely
>>To: <karlnet@WISPNotes.com>
>>Message-ID: <FIEJKNBFHPMNGAPPNMADAELIDBAA.rick@snider.org>
>>Content-Type: text/plain; charset="iso-8859-1"
>>
>>
>>Is there a safe way to do remote upgrades to KN105 and RG-1100 boards over
>>the radio link?
>>
>>I assume loading in a Config File to the Bin before downloading would
>work.
>>But is there
>>a supported way to remotely upgrade the Bin to these boards?
>>
>>
>>Rick Snider, PE
>>Hillcountry Networks
>>Texas Rural Internet Engineering
>>
>>
>>
>>
>>------------------------------
>>
>>Message: 6
>>Date: Wed, 8 Dec 2004 21:57:44 +0100
>>From: "Dzevad Hadzic" <zex@zex.biz>
>>Subject: RE: [Karlnet] RE: 4.46 released
>>To: <blair@wmwisp.net>, "'Karlnet Mailing List'"
>> <karlnet@WISPNotes.com>
>>Message-ID: <20041208205754.4A8F4F2806@paris.akorn.net>
>>Content-Type: text/plain; charset="us-ascii"
>>
>>Did you upgrade your unit's and is everyhintg ok?
>>
>>
>>
>>>-----Original Message-----
>>>From: Blair Davis [mailto:blair@wmwisp.net]
>>>Sent: Wednesday, December 08, 2004 6:22 PM
>>>To: karlnet@WISPNotes.com
>>>Subject: [Karlnet] RE: 4.46 released
>>>
>>>I am using 4.46 on my AP-1000E / Wavepoint II-E units. No
>>>special problems found so far.
>>>
>>>DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
>>>connector) unless you want to go replace / reload the unit.
>>>It WILL cause the unit to lock up.
>>>
>>>Preparing to load 4.46 on my flashroms and on my OR-500 /
>>>OR-2 and RG-1x00 units later today.
>>>
>>>Blair Davis
>>>West Michigan Wireless ISP
>>>269-686-8648
>>>
>>>A Division of :
>>>Camp Communication Services, INC
>>>
>>>
>>>_______________________________________________
>>>Karlnet mailing list
>>>Karlnet@WISPNotes.com
>>>http://lists.wispnotes.com/mailman/listinfo/karlnet
>>>
>>>
>>>
>>>
>>
>>
>>
>>------------------------------
>>
>>Message: 7
>>Date: Thu, 9 Dec 2004 09:01:29 +1100
>>From: "Brenden Cooper" <brenden@megalink.com.au>
>>Subject: [Karlnet] 4.46 test
>>To: <karlnet@WISPNotes.com>
>>Message-ID: <004201c4dd71$795e4280$c85d20cb@s>
>>Content-Type: text/plain; charset="us-ascii"
>>
>>I have put on the 4.46 vision on to a base that had a big problem with
>>lock ups.
>>So far so good, it hasn't lock up since installed.
>>
>>Brenden
>>Megalink Aust
>>
>>
>>-----Original Message-----
>>From: karlnet-bounces@WISPNotes.com
>>[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of
>>karlnet-request@WISPNotes.com
>>Sent: Thursday, 9 December 2004 4:01 AM
>>To: karlnet@WISPNotes.com
>>Subject: Karlnet Digest, Vol 24, Issue 5
>>
>>
>>Send Karlnet mailing list submissions to
>> karlnet@WISPNotes.com
>>
>>To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>>or, via email, send a message with subject or body 'help' to
>> karlnet-request@WISPNotes.com
>>
>>You can reach the person managing the list at
>> karlnet-owner@WISPNotes.com
>>
>>When replying, please edit your Subject line so it is more specific than
>>"Re: Contents of Karlnet digest..."
>>
>>
>>Today's Topics:
>>
>> 1. RE: 4.46 released (Dzevad Hadzic)
>>
>>
>>----------------------------------------------------------------------
>>
>>Message: 1
>>Date: Wed, 8 Dec 2004 02:35:26 +0100
>>From: "Dzevad Hadzic" <zex@zex.biz>
>>Subject: RE: [Karlnet] 4.46 released
>>To: "'TerabeamTechnical Services'" <techsupport@terabeam.com>,
>> "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
>>Message-ID: <20041208013540.85E83F285E@paris.akorn.net>
>>Content-Type: text/plain; charset="us-ascii"
>>
>>Did anybody tested 4.46 ?
>>Btw seems that terabeam website is very long time down...
>>
>>
>>
>>
>>
>>------------------------------
>>
>>_______________________________________________
>>Karlnet mailing list
>>Karlnet@WISPNotes.com
>>http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>>
>>End of Karlnet Digest, Vol 24, Issue 5
>>**************************************
>>
>>
>>
>>------------------------------
>>
>>Message: 8
>>Date: Wed, 08 Dec 2004 17:36:53 -0700
>>From: "Caleb Carroll" <karlnet@pathcom.ca>
>>Subject: Re: [Karlnet] RE: 4.46 released
>>To: blair@wmwisp.net, "Karlnet Mailing List" <karlnet@WISPNotes.com>,
>> karlnet@WISPNotes.com
>>Message-ID: <200412081736530853.1B1F20EB@mail.pathcom.ca>
>>Content-Type: text/plain; charset="ISO-8859-1"
>>
>>
>>Read the bloody e-mail from Reg. It says:
>>
>>***
>> Known Issue:
>>
>> 1) AP-1000 units with boot version 3.20 should not be upgraded to
>>versions
>> higher than 4.44-02.
>>***
>>
>>AP-1000's with BNC connectors all have 3.20 boot prom.
>>
>>*********** REPLY SEPARATOR ***********
>>
>>On 2004-12-08 at 12:21 PM Blair Davis wrote:
>>
>>
>>
>>>I am using 4.46 on my AP-1000E / Wavepoint II-E units. No special
>>>problems found so far.
>>>
>>>DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
>>>connector) unless you want to go replace / reload the unit. It WILL
>>>cause the unit to lock up.
>>>
>>>Preparing to load 4.46 on my flashroms and on my OR-500 / OR-2 and
>>>RG-1x00 units later today.
>>>
>>>Blair Davis
>>>West Michigan Wireless ISP
>>>269-686-8648
>>>
>>>A Division of :
>>>Camp Communication Services, INC
>>>
>>>
>>>_______________________________________________
>>>Karlnet mailing list
>>>Karlnet@WISPNotes.com
>>>http://lists.wispnotes.com/mailman/listinfo/karlnet
>>>
>>>
>>
>>
>>
>>
>>
>>------------------------------
>>
>>Message: 9
>>Date: Thu, 9 Dec 2004 02:05:30 +0100
>>From: "Dzevad Hadzic" <zex@zex.biz>
>>Subject: [Karlnet] How do you ppl check noise floor
>>To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
>>Message-ID: <20041209010535.711F2F26F8@paris.akorn.net>
>>Content-Type: text/plain; charset="us-ascii"
>>
>>I recently had problem with setuping long link ~20 miles. After setting up
>>units and mounting antennas on tower I was able to see other unit
>>In wireless link test but there was too much noise ( I fond this latter)
>to
>>establish connection.
>>
>>Only way witch comes to my mind was to setup one unit to 802.11 and use
>>netstumbler to check noise ratio and find low-noise channel.
>>If noise is too high link does not work and I can't see how much noise is
>>around with wireless link test.
>>This sounds to me like catch 22.
>>Is there some other way to check for noise ratio without establishing link
>>test ?
>>
>>
>>
>>
>>------------------------------
>>
>>_______________________________________________
>>Karlnet mailing list
>>Karlnet@WISPNotes.com
>>http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>>
>>End of Karlnet Digest, Vol 24, Issue 6
>>**************************************
>>
>>_______________________________________________
>>Karlnet mailing list
>>Karlnet@WISPNotes.com
>>http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>>
>
>
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|