Wait a sec.
Am I reading this correctly?
You have 2 flashrom modules & 2 NICs with rom chips installed on the same
MB?
I have had allot of bad ROM chips on NICs in the past that would cause me
allot of grief!
N
-----Original Message-----
From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]
On Behalf Of Blair Davis
Sent: Monday, November 22, 2004 2:39 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Setting up FlashRom units
I am having trouble getting a new flashrom system running to load the
software on it. Help?
I have 2 Flashrom modules, 2 NIC's with ROM chip.
Installed each in VIA socket 7 motherboard.
Installed ISA video card
Boot units. Units test mem, report no IDE found.
Units display POST summary screen including the stats on the NIC.
Units then report DISK BOOT ERROR. INSERT DISK AND STRIKE ANY KEY.
Standard disk boot error message......
I thought that they started running from the ROM on the NIC.
All the LED's on the flashrom module are lit and stay lit.
What am I doing wrong?
I have other flashrom units working on the same hardware. But, it's
been so long since I built one, I think I may be making one of those
dumb errors....
Blair Davis
West Michigan Wireless ISP
269-686-8648
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|