Hallo,
> The interface monitor on the base says that the traffic is normal (100
> -300KByte/s)
300kByte = 2.4 Mb for cell 2? Plus some traffic for cell 1... Your PtP is still
at 2.4 GHz and is based at classic 802.11b NOT Turbocell? Is your PTP link able
to transfer so much data? And if there are too much small packets?
> Now we have a location with 2 cells and a PTP all on 2,4Ghz
> The PTP is no TurboCell
> Cell 1 = Ch1 (KN100)
> Cell 2 = Ch9 (KN202) new RG+
> PTP = Ch13
Try to change channel of Cell 2 somewhere between 6-8.
> Our Network on that location is:
>
> PTP => Linux Router => Switch => KN100 and a KN202 base ISP
Your Linux Router need good QoS with CBQ, TBF or HTB
I am interested with pings from internet:
1) to first device of PTP link
2) to second -||-
3) to Linux Router
4) to KN100 and KN202
5) to users
Regards
Peter Dordik
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|