Karlnet
[Top] [All Lists]

Re: [Karlnet] Prisim cards in AP-1000's

To: "Karlnet Mailing List" <karlnet@wispnotes.com>
Subject: Re: [Karlnet] Prisim cards in AP-1000's
From: "Bob Hrbek" <bhrbek@jagwireless.com>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Sat, 3 May 2003 21:28:16 -0500
List-post: <mailto:karlnet@WISPNotes.com>
I got it working.  I didn't realize (at first) that the card FW was that
important.  I just installed the EnGenius card at a tower today.  It isn't
reporting noise and will only report signal strength if I do a signal survey
from the client.

I really wish it would report noise.   :(

I updated the card to the latest...I think it was 1.7 something.

-bob
----- Original Message -----
From: "Caleb Carroll" <karlnet@pathcom.ca>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Saturday, May 03, 2003 12:43 PM
Subject: Re: [Karlnet] Prisim cards in AP-1000's


> What Firmware did you upload to the AP-1000?  I've only ever used SA-4400.
>
> Was the EnGenius card in the AP-1000 when you uploaded the firmware to the
AP-1000?  If so, upload the firmware without the EnGenius card in the
AP-1000.
>
> Does the AP-1000 boot and work in TC mode with a regular Orinoco card?
>
> What firmware version do you have on the card?  Anything better than 1.4.9
or 1.5.6 should be fine.  Have you tried another EnGenius card?
>
> *********** REPLY SEPARATOR  ***********
>
> On 2003-May-02 at 9:32 PM Bob Hrbek wrote:
>
> >Well, I'm trying to use TC mode.  The AP-1000 doesn't even boot up
> >completely.  I hangs with a red light on the PC led that the card is
> >plugged
> >in, regardless of slot A or B.
> >
> >It is an EnGenius 200mW card from Netgate.com
> >
> >Any thoughts?
> >
> >-bob
> >----- Original Message -----
> >From: "Leszek Olszewski" <leszek@oslink.pl>
> >To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> >Sent: Friday, May 02, 2003 3:45 PM
> >Subject: Re: [Karlnet] Prisim cards in AP-1000's
> >
> >
> >> They don't work in 802.11b mode, they only work in Turbocell mode.
> >>
> >> One of the bugs that supposedly don't exist.
> >>
> >> Leszek
> >>
> >>
> >> At 15:13 2003-05-02 -0500, you wrote:
> >> >I just ordered a few of the 200mW cards from netgate.com
> >> >
> >> >I stuck one in a 4.31 Karlnet AP-1000 and it won't boot with the card
> >> >inserted.  Any ideas?
> >> >
> >> >I thought any Prisim 2 card worked.
> >> >
> >> >hmm
> >> >
> >> >_______________________________________________
> >> >Karlnet mailing list
> >> >Karlnet@WISPNotes.com
> >> >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >>
> >> _______________________________________________
> >> Karlnet mailing list
> >> Karlnet@WISPNotes.com
> >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> >>
> >
> >_______________________________________________
> >Karlnet mailing list
> >Karlnet@WISPNotes.com
> >http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>

<Prev in Thread] Current Thread [Next in Thread>