Karlnet
[Top] [All Lists]

RE: [Karlnet] RG-1100 END OF LIFE!

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] RG-1100 END OF LIFE!
From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
Reply-to: karlnet@WISPNotes.com
Date: Thu, 19 Dec 2002 10:54:44 -0500
List-post: <mailto:karlnet@WISPNotes.com>
Since this board is 100mhz or 133mhz does it provide more performance
than the rg's?

Dan Metcalf
Wireless Broadband Systems
http://www.wbsysnet.com/
877-685-0578
dan.metcalf@wbsysnet.com


> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On
> Behalf Of Kevin Knuth
> Sent: Thursday, December 19, 2002 8:59 AM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] RG-1100 END OF LIFE!
> 
> Mark,
> 
> Karlnet DOES support the Soekris 4511 board.  You do have to disable
one
> of
> the ethernet ports though, as that build can only support ONE Ethernet
and
> One Radio interface!
> 
> Kevin
> 
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com
[mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Mark Wauchope
> Sent: Wednesday, December 18, 2002 6:21 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] RG-1100 END OF LIFE!
> 
> 
> The Soekris is a good choice but Karlnet refuses to support it.  I
called
> to
> ask them why they are not supporting it and talked with the software
> engineer working on the testing and he gave me some lame excuse why
they
> can't get it released.  I started using StarOS on it instead and am
having
> good results.  Also StarOS is a lot cheaper and updated more
frequently.
> 
> StarOS:  http://www.station-server.com/
> 
> --
> Mark Wauchope, Director of Engineering, Kivanet Inc
> 776 East Second Avenue Suite 207 Durango, CO  81301
> 970-749-2711  http://www.ekiva.net/  mark@ekiva.net
> 
> 
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On
> Behalf Of Dan Metcalf
> Sent: Wednesday, December 18, 2002 4:16 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] RG-1100 END OF LIFE!
> 
> 
> What we need is some type of x86 board that will work w/ PCMCIA and
POE to
> replace the rg1000
> 
> I too have put our main "wisp" on hold for expansion until a decision
can
> be
> made about its future based on karlnet.
> 
> 
> Dan Metcalf
> Wireless Broadband Systems
> http://www.wbsysnet.com/
> 877-685-0578
> dan.metcalf@wbsysnet.com
> 
> 
> ---
> [This E-mail scanned for viruses by Declude Virus]
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> ---
> [This E-mail scanned for viruses by Declude Virus]


---
[This E-mail scanned for viruses by Declude Virus]


<Prev in Thread] Current Thread [Next in Thread>