>that is major coolness.. are you using RADIUS to set this?
no, w/ RGs, you c an just enter it in
-Charles
----- Original Message -----
From: "Dan Metcalf" <danm@suncorstainless.com>
To: <karlnet@WISPNotes.com>
Sent: Thursday, June 13, 2002 8:47 PM
Subject: RE: [Karlnet] Private side vs. public side
> Bill,
>
>
> We set the wireless side to 128k because that LIMITS how much data the CPE
> can move onto the wireless network, (uploading in this case as the data
is
> coming from the CPE), and then we limit the Ethernet side because this is
> the interface that is used for downloads.
>
> Thus we set a 768k/128k limit through the hardware.
>
>
> Generally the residential network is IDLE.
>
> Dan Metcalf
> Wireless Broadband Systems
> dan.metcalf@wbsysnet.com
> 781-658-2075
> www.wirelessbroadbandsystems.com
>
> -----Original Message-----
> From: Bill Fisher [mailto:fisher@akorn.net]
> Sent: Thursday, June 13, 2002 9:46 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] Private side vs. public side
>
> > Yes we do offer a 768k/128k service for the residential market,
> > and yes I do
> > use Karlnet to control bandwidth, I set the bandwidth on the wireless
side
> > to 128k and 768k on the Ethernet side.
>
> So I didn't know this was possible.
>
> Can you explain to me why you set the wireless side to 128K and the
ethernet
> side to 768K ?
>
> Thanks
>
> bill
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|