> Second, on the ticking sounds every few seconds. Go into your BIOS and
> change the setting for Interrupt 7 from 'PCI/ISA PNP' or some such setting
> (will vary by motherboard manufacture to 'Legacy ISA' (or similar). This
> might move interrupts around for you under windows, so you may have to
> change it back for proper windows operation, but normally 7 would be
> assigned to the printer port under windows so it should not affect it.
>
Hi Dan
tnx for the info. First of all, tnx for the Info. Yes that helps. The
only
problem, I had my DVPTSR with IRQ 2 running, and also after I set IRQ7
to
legacy ISA, the Ticker sound stops.
But i used this PC sinc 5 Years (Pentium 166MMX) and never changed the
BIOS
settings before. And with Win95 DOS no trouble. Now I installed Win98,
and
this things was happen.
Anyway tnx for the tip
Wil DJ7AA
--
WWW: http://www.k1ea.com/
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
Problems: owner-ct-user@contesting.com
|