Amps
[Top] [All Lists]

Re: [Amps] 8877 heater open circuit after shipping

To: "'Facility 406'" <facility_406@bruteforcedevelopment.com>, <amps@contesting.com>
Subject: Re: [Amps] 8877 heater open circuit after shipping
From: "Dave Harmon" <k6xyzdave@gmail.com>
Date: Sat, 25 Mar 2023 12:52:46 -0500
List-post: <mailto:amps@contesting.com>
Absolutely.....sounds like a flim flam to me!


73

David Harmon
K6XYZ
Sperry, OK


-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Facility 406
Sent: Saturday, March 25, 2023 12:39 PM
To: amps@contesting.com
Subject: Re: [Amps] 8877 heater open circuit after shipping

On 3/25/2023 10:32, gudguyham--- via Amps wrote:
> If it were me I’d want to see for myself that the filament went open!

Makes sense.

Odd about the other fellow with TWO that is open, or closed, depending on 
orientation.

Do these have a tilt-switch built into them??

Kurt

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>