Amps
[Top] [All Lists]

Re: [Amps] 8877 heater open circuit after shipping

To: Alan Ibbetson <alan@g3xaq.net>, <amps@contesting.com>
Subject: Re: [Amps] 8877 heater open circuit after shipping
From: gudguyham--- via Amps <amps@contesting.com>
Reply-to: "gudguyham@aol.com" <gudguyham@aol.com>
Date: Sat, 25 Mar 2023 17:32:47 +0000 (UTC)
List-post: <mailto:amps@contesting.com>
If it were me I’d want to see for myself that the filament went open!  


Sent from the all new AOL app for iOS


On Saturday, March 25, 2023, 12:52 PM, Alan Ibbetson <alan@g3xaq.net> wrote:

I just shipped an Eimac 8877/3CX1500A7 date code 1981 from England to
Northern Ireland. I used a genuine Eimac foam filled box. it arrived with
an open circuit heater. Is this a common failure? Are the heaters in these
tubes especially fragile or have I just been unlucky?

73, Alan G3XAQ

-- 
Alan Ibbetson
alan@g3xaq.net
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>