[Amps] Testing Tubes with a Henry 2K

Amps

[Amps] Testing Tubes with a Henry 2K

To:	"amps@contesting.com" <amps@contesting.com>
Subject:	[Amps] Testing Tubes with a Henry 2K
From:	Brett Sims <brett@simsranch.com>
Date:	Mon, 23 Aug 2021 19:32:08 -0500 (CDT)
List-post:	<mailto:amps@contesting.com>

Looks like the consensus thinks I should give it a try...   So I will.   Thanks 
for the help and advice.  Brett  


______________________________________________________________________________________________________________
So if you have a Henry 2k with filaments in parallel and currently runs two 
3-500Z's with appropriate chimneys, could one test a single tube?  
Wadda ya think?

Thanks  Brett   N5SQK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Testing Tubes with a Henry 2K, (continued) [Amps] Testing Tubes with a Henry 2K, Donald Fox via Amps Re: [Amps] Testing Tubes with a Henry 2K, Joe Re: [Amps] Testing Tubes with a Henry 2K, Carl Re: [Amps] Testing Tubes with a Henry 2K, Donald Fox via Amps Re: [Amps] Testing Tubes with a Henry 2K, Bob D. [Amps] Testing Tubes with a Henry 2K, Brett Sims Re: [Amps] Testing Tubes with a Henry 2K, Jim Brown Re: [Amps] Testing Tubes with a Henry 2K, Donald Fox via Amps Re: [Amps] Testing Tubes with a Henry 2K, Carl Re: [Amps] Testing Tubes with a Henry 2K, Mike McCarthy, W1NR [Amps] Testing Tubes with a Henry 2K, Brett Sims <=

Previous by Date:	Re: [Amps] Testing Tubes with a Henry 2K, Carl
Next by Date:	Re: [Amps] 572B/T160L tube class C, Fuqua, William L.
Previous by Thread:	Re: [Amps] Testing Tubes with a Henry 2K, Mike McCarthy, W1NR
Next by Thread:	[Amps] Ldmos won’t bias, Ian Swain
Indexes:	[Date] [Thread] [Top] [All Lists]