But you didn't say that ever....
I assumed your were looking for a SB220 transformer for a SB220 since
that is what you originally said.
Thanks
73
Jim W7RY
On 10/30/2019 9:13 PM, Richard Solomon wrote:
But, I am not using it in an
SB-220. It's for a Commander
II VHF Amp (single 3CX800A7).
Just right for that tube.
73, Dick, W1KSZ
On Wed, Oct 30, 2019 at 6:00 PM Jim <jimw7ry@gmail.com
<mailto:jimw7ry@gmail.com>> wrote:
And it only produces 2240 volts DC. A bit low for an SB220....
Thanks
73
Jim W7RY
On 10/30/2019 1:38 PM, Joe Subich, W4TV wrote:
>
> >> https://www.antekinc.com/as-8t800-800va-transformer/
>
> Unfortunately, this transformer lacks the primary taps for CW/SSB
> operation of the OEM device.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 2019-10-30 10:23 AM, Joe wrote:
>>
>> On 10/30/2019 8:56 AM, Joe wrote:
>>> Morning Dick,
>>> If you are not afraid of making a few electrical and mechanical
>>> modifications, I would go with this transformer.
>>> https://www.antekinc.com/as-8t800-800va-transformer/
>>>
>>> I'm glad I did! 1/4 the cost of most drop in replacements. yet
MUCH
>>> better performance!
>>> Joe WB9SBD
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com <mailto:Amps@contesting.com>
>> http://lists.contesting.com/mailman/listinfo/amps
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com <mailto:Amps@contesting.com>
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com <mailto:Amps@contesting.com>
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|