Re: [Amps] SB-220 HV Transformer Wanted

[Joe <nss@mwt.net>]

Why need them?

Run it at the HV side and use less drive and less currents all around.

The CW/SSB switch I converted into a stand-by switch.

Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 10/30/2019 1:38 PM, Joe Subich, W4TV wrote:
> >> https://www.antekinc.com/as-8t800-800va-transformer/
>
> Unfortunately, this transformer lacks the primary taps for CW/SSB
> operation of the OEM device.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2019-10-30 10:23 AM, Joe wrote:
> > On 10/30/2019 8:56 AM, Joe wrote:
> > > Morning Dick,
> > > If you are not afraid of making a few electrical and mechanical 
> > > modifications, I would go with this transformer.
> > > https://www.antekinc.com/as-8t800-800va-transformer/
> > >
> > > I'm glad I did! 1/4 the cost of most drop in replacements. yet MUCH 
> > > better performance!
> > > Joe WB9SBD
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps