Date: Tue, 13 Jun 2017 12:10:33 -0400
From: "JC" <n4is@comcast.net>
To: "'Peter Voelpel'" <dj7ww@t-online.de>, "'Chris Wilson'"
<chris@chriswilson.tv>, <amps@contesting.com>
Subject: Re: [Amps] Ferrite Core for 160M PI Output ?
<Hi Peter
PI network loss is related with the Q of the inductor, you need material #2
or #6 ( better stability with temperature), #61 #77 are good for BALUN or
chokes and not good for inductors with high Q.
73
N4IS
JC
## He is talking about 136 khz. Dunno what the correct powdered Iron core is
at that freq.
#2 powdered iron cores may be as good as it gets.
## #61 ferrite is UHF material and semi useless for an HF balun. #77
ferrite is out of vogue
these days for HF baluns.....even though Hy-hain still uses it on their
BN-4000 balun.
Both have been replaced with type 31 ferrite.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|