Date: Wed, 17 May 2017 17:11:29 +0000
From: Manfred Mornhinweg <manfred@ludens.cl>
To: amps@contesting.com
Subject: Re: [Amps] Stripping Litz
<Litz wire most commonly has polyurethane insulation. This is solderable
- you don't need to strip it!
## If a builder has no access to Litz wire, plan B would be to use some fine
gauge
magnet wire, and use a bunch of em in parallel, then twist the assy so it ends
up like
stranded wire. Then you still have access to the individual wires at each end
of the
completed assy.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|