Re: [Amps] Glow, gettering, and voltage

[Joe <nss@mwt.net>]

Put in the controlled bias circuit and they won't glow unless youre 
running RTTY or similar. And you can leave it in the SSB position all 
the time.
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 1/8/2017 10:46 AM, Catherine James wrote:
> I tuned for peak power at the higher voltage, advanced the load control a bit 
> more, and operated there.
>
> I do not want to wear out the unobtainium CW/SSB switch by going back and forth 
> every time I use the amp. I want to pick one voltage setting and do 95% of my 
> operation there.
>
> 73,
> Cathy
> N5WVR
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps