Many, not all 3-500 amps have a problem with overheating filament pins
and melting solder, This is primarily an air flow problem. NOTE, once
the tube socket pins have over heated, they are likely shot.
I'll defer to Carl and others who know which ones, why, and how to fix
them..
" I presume" someone built an amp that way, it looked like a good way,
which it wasn't, so many copies followed. Who was first, who is bad,
and who is good, I'll leave to the guys that know.
But it does appear to be a copied design. After all, there are not many
variations in the way you can mount those glass jugs.
My 2K4 had a LARGE blower under the chassis, blowing directly up on the
sockets. It seemed to work well.
73
Roger (K8RI)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|