ORIGINAL MESSAGE:
On Wed, 21 Nov 2012 14:15:57 -0500, Ralph wrote:
>I have a Nye-Viking tuner with their home made roller inductor. The roller
>has seized up on the shaft that guides it along the inductor. They used
>some sort of conductive grease on the shaft and a few other places on the
>inductor assembly to improve contact. Does anyone have a source for a
>conductive grease I can use on the roller once I get it all apart and freed
>up?
REPLY:
I wouldn't use conductive grease on a roller inductor, or at least anywhere it
might work it's way in between the windings.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|