I don't think the grease is conductive, It is that as long as it remains
fluid the
high pressure contacts can poke thru it. If the grease was conductive it
would likely get hot and scorch the conductors since it would be have much
higher resistivity than the conductors.
73
Bill wa4lav
At 02:15 PM 11/21/2012 -0500, Ralph Young wrote:
I have a Nye-Viking tuner with their home made roller inductor. The roller
has seized up on the shaft that guides it along the inductor. They used
some sort of conductive grease on the shaft and a few other places on the
inductor assembly to improve contact. Does anyone have a source for a
conductive grease I can use on the roller once I get it all apart and freed
up?
Ralph N4TG ralry@chartertn.net
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|