Most likely available at any electrical supply store or well stocke
box/hardware store. Its the same stuff used on aluminum conductors when
attaching to copper. Penetrox is one of the brand names.
I also use it on the telescoping joints of all my yagis.
Carl
KM1H
----- Original Message -----
From: "Jerry Kaidor" <jerry@tr2.com>
To: "Ralph Young" <ralry@chartertn.net>
Cc: <Amps@contesting.com>
Sent: Thursday, November 22, 2012 5:07 PM
Subject: Re: [Amps] conductive grease for roller inductor
www.caig.com
Every conductive grease and oil that a child could want.
- Jerry KF6VB
I have a Nye-Viking tuner with their home made roller inductor. The
roller
has seized up on the shaft that guides it along the inductor. They used
some sort of conductive grease on the shaft and a few other places on the
inductor assembly to improve contact. Does anyone have a source for a
conductive grease I can use on the roller once I get it all apart and
freed
up?
Ralph N4TG ralry@chartertn.net
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1427 / Virus Database: 2629/5412 - Release Date: 11/22/12
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|