Amps
[Top] [All Lists]

Re: [Amps] Need -- 300 ohm 50w noninductive resistor

To: Vic K2VCO <k2vco.vic@gmail.com>
Subject: Re: [Amps] Need -- 300 ohm 50w noninductive resistor
From: "Col. Paul E. Cater" <paulecater@gmail.com>
Date: Wed, 20 Jul 2011 16:33:30 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Newark has them-----
http://www.newark.com/bourns/pwr221-2fc3000f/resistor-thick-film-pwr-300ohm/dp/64M0655

Paul, WD8OSU


On Wed, Jul 20, 2011 at 4:17 PM, Vic K2VCO <k2vco.vic@gmail.com> wrote:

> Thanks, they don't stock 300/50w but I could get five 1500/10w, which would
> work.
>
> On 7/20/2011 12:19 PM, Glen Zook wrote:
> > Try Mouser ( http://www.mouser.com ) for thick film types.  They do have
> to be attached
> > to the chassis for heat sinking.
> >
> > Glen, K9STH
> >
> > Website:  http://k9sth.com
> >
> >
> > --- On Tue, 7/19/11, Vic K2VCO<k2vco.vic@gmail.com>  wrote:
> >
> > I'm looking for a 300-ohm 50w non-inductive resistor. I'm going to try
> the G2DAF
> > circuit with a pair of 4-400As and this is for the grid resistor.
>
> --
> Vic, K2VCO
> Fresno CA
> http://www.qsl.net/k2vco/
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>