Thanks, they don't stock 300/50w but I could get five 1500/10w, which would
work.
On 7/20/2011 12:19 PM, Glen Zook wrote:
> Try Mouser ( http://www.mouser.com ) for thick film types. They do have to
> be attached
> to the chassis for heat sinking.
>
> Glen, K9STH
>
> Website: http://k9sth.com
>
>
> --- On Tue, 7/19/11, Vic K2VCO<k2vco.vic@gmail.com> wrote:
>
> I'm looking for a 300-ohm 50w non-inductive resistor. I'm going to try the
> G2DAF
> circuit with a pair of 4-400As and this is for the grid resistor.
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|