Amps
[Top] [All Lists]

Re: [Amps] al-811 wont transmit

To: Alek Petkovic <vk6apk@bigpond.com>, 'amps' <amps@contesting.com>
Subject: Re: [Amps] al-811 wont transmit
From: "Fuqua, Bill L" <wlfuqu00@uky.edu>
Date: Sat, 18 Jun 2011 23:52:33 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
is that Read The Full Manual
Bill wa4lav

________________________________________
From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of 
Alek Petkovic [vk6apk@bigpond.com]
Sent: Saturday, June 18, 2011 8:22 PM
To: 'amps'
Subject: Re: [Amps] al-811 wont transmit

In the land downunder we say RTFM. Still, nobody does it, even after
their wife tells them to. We are male after all.

73, Alek.


At 09:39 PM 18/06/2011, Clint Talmadge W5CPT wrote:
>In regard to the first poster and the two customers mentioned below:  We had
>an expression in the military when we ran across something of this nature -
>RTM (with the expletive deleted) which stood for Read the Manual.  No Manual
>???  Ameritron has them on line, downloadable, for free.  If any of  these
>fellows did indeed hook an amp to a radio without reading the manual I am
>not sure I would want them in my shack.  On second thought I am sure I
>wouldn't want them in my shack.
>
>Clint Talmadge - W5CPT
>
>-----Original Message-----
>From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
>Behalf Of Ron Youvan
>Sent: Saturday, June 18, 2011 8:32 AM
>To: amps
>Subject: Re: [Amps] al-811 wont transmit
>
>Mitch Cox wrote:
>
> > I have had 2 customers this week that asked that same question. They had
>no idea there was a key line that needed to be connected. Both were first
>time amplifier owners and they thought an amp keyed on it's own after RF was
>applied. Anytime this happens I try to remember back to my first experience
>with Ham radio and how stupid I was made to feel because I didn't magically
>know everything. Sometimes you just have to be patient and understanding,
>bless their hearts.
>
>    I think some CB foot warmers have "RF sensing" switching circuits.  I
>know I've had several 2 meter amplifiers that did.  (5 W in 35 W out)  I
>don't think it is 100% stupidity.
>--
>     Ron  KA4INM - The man who sets out to carry a cat by its tail learns
>something
>                   that will always be useful and which never will grow dim
>or doubtful.
>                                                                      -- Mark
>Twain.
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
>=======
>Email scanned by PC Tools - No viruses or spyware found.
>(Email Guard: 7.0.0.21, Virus/Spyware Database: 6.17740)
>http://www.pctools.com/
>=======

 From sunny Binningup, Western Australia

http://www.qrz.com/db/vk6apk
http://www.qrz.com/db/vk6ap





=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 7.0.0.21, Virus/Spyware Database: 6.17740)
http://www.pctools.com/
=======
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>