KJ9D (SK) built a few Home Brew 4-1000 Amps and he cut the top and bottom
out of large pickle Jars. They wokred fine,
73
Mike
KK9V
On Fri, Dec 24, 2010 at 9:27 AM, Wayne Rogers <n1wr@chesapeake.net> wrote:
>
> I have managed to put a crack in my chimney (SK-506 for 4-1000 etc). The
> crack is such that I am afraid that even the pressure from the metal clips
> will cause a large piece of the glass to break off.
>
> Has anyone had any luck either repairing such a crack or having a glass
> repair firm do it? I have looked around for some such repair service, but
> have not had any luck. I was hoping to find someone that repairs antique
> glass. I would think that in the right hands the glass could be heated and
> re-joined?
>
> As these chimneys are getting scarce I'd like to repair this one - but I'm
> probably looking at a cost equal or greater than what I can pay for a
> replacement. Any thoughts?
>
> Merry Christmas to all.
> Wayne N1WR
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--
Mike Stokes
KK9V
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|