george is easy to mesure the transformer
first mesure the cable pairs and mark them
1 do you now were is the primary cables ??
2 if you do feed them 11,5 volts ac and not 115 ac only 11,5 ac
3 you mesure the rest of the cables and what you find multyply by 10
good luck and be carefull
SV4JYI
----- Original Message -----
From: "George" <K4GVT@comcast.net>
To: <amps@contesting.com>
Sent: Monday, November 29, 2010 6:17 PM
Subject: [Amps] Transformer help please
> Greetings, I have a high voltage transformer with the following
> information on it:
> PT-1260
> HTS-9286
> 9960805
>
> This was used in an home brew amp that has been cannibalized.
> I'm trying to identify the transformer specs, primarily the ratings and
> any other information like the source. Any help is most appreciated.
>
> 73,
> George, K4GVT
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|