Amps
[Top] [All Lists]

Re: [Amps] A dual 4-1000 amp

Subject: Re: [Amps] A dual 4-1000 amp
From: Jim Barber <audioguy@charter.net>
Reply-to: audioguy@charter.net
Date: Fri, 26 Nov 2010 12:09:08 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The relays and anything else that makes a chirp, burp or crunch when you 
key up is critical to AM operation.

I run legal-limit AM with my Flex-5000A and an 8877, but while everyone 
loves the audio I do take flak that it doesn't take 5 seconds of noisy 
relays and grinding toggle switches to get from RX to TX and back. :-)

73,
Jim N7CXI


On 11/26/2010 5:32 AM, Carl wrote:
> You also need to run it as an AM linear and use a couple of large clunky
> relays that can easily be heard over the air when you hit the PTT on the
> D-104.
>
> I suspect that a pair of those EBM-Papst muffin fans I mentioned on here
> would give more than adequate cooling with SK-510 sockets.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From:<TexasRF@aol.com>
> To:<sub1@rogerhalstead.com>;<amps@contesting.com>
> Sent: Friday, November 26, 2010 8:02 AM
> Subject: Re: [Amps] A dual 4-1000 amp
>
>
>> Since perception is everything, as they say, you might consider using an
>> adequate blower for the amplifier and an audio recording of a jet plane
>> takeoff  to play in the background. This could save a ton of $$!
>>
>> Then you could turn the sound on/up whenever needed for intimidation or
>> other motives. Earplugs optional.
>>
>> 73,
>> Gerald K5GW
>>
>>
>>
>> In a message dated 11/26/2010 6:55:31 A.M. Central Standard Time,
>> sub1@rogerhalstead.com writes:
>>
>>
>>
>> On 11/26/2010 7:19 AM, donroden@hiwaay.net wrote:
>>>   If you want that Mig-21 sucking up gravel on an unimproved runway
>>>   sound, go with a couple of Rotron Centrimax CX-33 blowers.
>>>
>>> Or,  if the XYL doesn't mind a little two-cycle smoke, use a 41cc
>>> Homelite  leaf blower with a tuned pipe.
>> Although a couple of vacuum cleaner motors  will work, a better choice
>> would be to take the turbine out of a self  contained plasma cutter.  Out
>> in the open they really sing, but  ...you did say cash was a problem and
>> those self contained torches are  running a tad shy of two grand.
>>
>> Maybe get some of the old vacuum  cleaners, put 3 or 4 of the blade sets
>> on one shaft...a bit of metal work  and that sucker will move air AND
>> make an impressive sound.
>>
>> Then  again you could take the super charger out of a car, and turn it
>> with one  of the model jet engines.  I'm not sure if you would be able to
>> hear  the turbines over the engine or not.
>>
>> Good Luck,
>>
>> Roger  (K8RI)
>> .
>>> Don W4DNR
>>>
>>>
>>>
>>>
>>> Quoting  Patrick<tpblogeditor@gmail.com>:
>>>
>>>> I've got a wild  hair up my derriere about building something. I also
>>>> want  to>   buy, find or whatever, the biggest loudest, 757  Airplane
>>>> motor spooling up sounding blower motor that I can find  for it. I WANT
>>>> people to say stuff like, "Oh Lord A-Mighty ---  He's turning the big
>> iron
>>>> on!" (or at least the big  bulbs...)>   -Chuck Adkins K8CPA
>>>>   http://www.politicalbyline.com
>>>   _______________________________________________
>>> Amps mailing  list
>>> Amps@contesting.com
>>>   http://lists.contesting.com/mailman/listinfo/amps
>>>
>> _______________________________________________
>> Amps  mailing  list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>