Amps
[Top] [All Lists]

Re: [Amps] parasitic suppressor voodoo

To: "'Alek Petkovic'" <vk6apk@bigpond.com>, <amps@contesting.com>
Subject: Re: [Amps] parasitic suppressor voodoo
From: "Gary Schafer" <garyschafer@comcast.net>
Reply-to: garyschafer@comcast.net
Date: Thu, 15 Jul 2010 22:16:15 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi Alek,

If you have not already done so, read Rich Measures page on designing
amplifiers. Yes he talks about "nichrome" but the info is good.

http://www.somis.org/D-amplifiers3.html

scroll down to VHF Stability.

73
Gary  K4FMX

> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Alek Petkovic
> Sent: Thursday, July 15, 2010 5:30 PM
> To: DF3KV; amps@contesting.com
> Subject: Re: [Amps] parasitic suppressor voodoo
> 
> At 09:27 PM 15/07/2010, DF3KV wrote:
> >Parasitic suppressors should be designed for the circuit which needs it.
> 
> 
> 
> 
> 
> OK. Just a simple question from down under.
> 
> Who, among all the subscribers on this list, knows how to do that?
> 
> I'm not talking about cut and try methods. I'm
> talking about mathematics and tube spec sheets
> and parasitic frequencies etc etc. I have NEVER
> seen anything, anywhere, which gives the designer
> or builder of an amplifier, the tools or formulas to work this stuff out.
> 
> Time and time again, we hear this Nichrome stuff
> raised and time and time again, the two camps
> slug it out and time and time again, nobody wins.
> 
> I don't wish to align with any side here. My question is genuine.
> 
> How would I design a parasitic suppressor from
> scratch? What formulas would I use to calculate
> the L, R for a particular tube or a particular rf deck layout?
> 
> Don't tell me stuff like "four turns and 50 ohms
> worked for me." I am talking science and that
> sort of approach is NOT scientific. Gimme calculations. Somebody must
> know.
> 
> 73 and thanks,
> Alek. VK6APK
> 
> 
> 
> >The parasitics frequencies vary with tube selection and amp layout.
> >Most of the time I don´t even need one.
> >
> >
> >73
> >Peter
> >
> >-----Original Message-----
> >From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> >Behalf Of Randy Pence
> >Sent: Donnerstag, 15. Juli 2010 14:10
> >To: amps@contesting.com
> >Subject: [Amps] parasitic suppressor voodoo
> >
> >Can someone explain the difference between the Parasitic Suppressors **
> that
> >Rich Measures sells compared to the ones Jeff Weinberg sold.
> >
> >--
> >Randy Pence
> >N4JZY
> >_______________________________________________
> >Amps mailing list
> >Amps@contesting.com
> >http://lists.contesting.com/mailman/listinfo/amps
> >
> >_______________________________________________
> >Amps mailing list
> >Amps@contesting.com
> >http://lists.contesting.com/mailman/listinfo/amps
> >
> >
> >
> >
> >=======
> >Email scanned by PC Tools - No viruses or spyware found.
> >(Email Guard: 7.0.0.18, Virus/Spyware Database: 6.15440)
> >http://www.pctools.com/
> >=======
> 
>  From sunny Binningup, Western Australia
> 
> http://www.qrz.com/db/vk6apk
> http://www.qrz.com/db/vk6ap
> 
> 
> 
> 
> 
> =======
> Email scanned by PC Tools - No viruses or spyware found.
> (Email Guard: 7.0.0.18, Virus/Spyware Database: 6.15440)
> http://www.pctools.com/
> =======
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>