Hi Bob,
Per the Jennings catalog, vacuum variables should be shipped at min. C.
73 & Good afternoon,
Marv WC6W
http://wc6w.50webs.com/
--- On Wed, 6/10/09, Robert Groh <rgroh@swbell.net> wrote:
> From: Robert Groh <rgroh@swbell.net>
> Subject: [Amps] Question: Ship Vacuum Variables at minimum or maximum?
> To: amps@contesting.com
> Date: Wednesday, June 10, 2009, 7:59 AM
> Getting set to sell off some vacuum
> variables and I have a question: when I ship them, should I
> set them at minimum capacity setting or at maximum
> capacity?
>
> I would think the answer is to ship with the capacitor set
> at it's minimum capacity - the 'rotor' would be retracted
> the most and the 'mechanical lever arm' (i.e. the length of
> the unsupported mass of the 'rotor') would, therefore, be at
> it's minimum.
>
> Comments and advice welcome. The vacuum variables are
> Jennings UCS and UCSL, by the way, if that matters.
>
> Thanks.
>
> 73
> Bob Groh, WA2CKY
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|