RICHARD SOLOMON wrote:
> I believe Carl aimed that "zinger" at me. I don't think he likes me
> any more !!
>
> I agree with you on Google, let's see if Emperor Gates search engine
> is any
> better.
>
> One other kicker to chew on, you have Silver Epoxy that is for thermal
> conduction (high resistance) and other stuff for electrical conduction
> (low resistance). Just to confuse the issue.
How about mixing them?<:-)) Actually that is a serious question. I use
both in building computers although I believe "Aritic Silver" is both a
great heat conductor and conductor. You sure don't want to get it on the
conductors or pins. No mix in a wee bit of epoxy. Just enough to make it
set up solid. I wonder if that'd work?
73
Roger (K8RI)
>
> 73, Dick, W1KSZ
>
> > Date: Fri, 29 May 2009 14:48:33 -0400
> > From: sub1@rogerhalstead.com
> > CC: amps@contesting.com
> > Subject: Re: [Amps] Silver epoxy yes
> >
> >
> >
> > Carl wrote:
> > > Thats because some lack the ability to do independent research and
> have to
> > > depend on others to answer the questions.
> > >
> > > I suspect it all begins back in the "Why mommy" days.
> > >
> > >
> > Or it might have to do with trying to find technical information on
> > something on Google for hours and being directed to commercial sites
> > instead of informative ones. OTOH there is so much misinformation out
> > there on technical subjects that you have to already know enough about
> > the subject to weed out the misinformed and intentional misdirection.
> > I've given up enough times that anymore I don't always think of Google
> > to find things. To me, Google is no where near as useful as it was a
> > couple years back. However if I want to purchase something, it'll come
> > up with so many sites/sellers I then have to spend time finding out
> > which ones are reputable.
> >
> > 73
> >
> > Roger (K8RI)
> > > Im not picking on anybody, this is a pretty much standard problem
> on most
> > > forums and subjects. Ive even seen flame wars break out when
> someone dared
> > > suggest the questioner try Google!
> > >
> > > Carl
> > > KM1H
> > >
> > >
> > > ----- Original Message -----
> > > From: "Bill W5WVO" <w5wvo@cybermesa.net>
> > > To: "Alex" <alexeban@gmail.com>; "'Carl'" <km1h@jeremy.mv.com>;
> "'Herzog'"
> > > <herzog@frontiernet.net>; "'Ham-amps'" <amps@contesting.com>
> > > Sent: Thursday, May 28, 2009 11:34 PM
> > > Subject: Re: [Amps] Silver epoxy yes
> > >
> > >
> > >
> > >> I don't get it. Why not just Google "silver epoxy"? You get a ton
> of hits.
> > >> This stufff is easy to find.
> > >> Bill W5WVO
> > >>
> > >> Alex wrote:
> > >>
> > >>> Try the Stepan Company. They used to manufacture a few kinds of
> > >>> silver epoxy years ago
> > >>> Alex 4Z5KS
> > >>>
> > >>> -----Original Message-----
> > >>> From: amps-bounces@contesting.com
> > >>> [mailto:amps-bounces@contesting.com] On Behalf Of Carl
> > >>> Sent: Thursday, May 28, 2009 2:05 AM
> > >>> To: Herzog; Ham-amps
> > >>> Subject: Re: [Amps] Silver epoxy yes
> > >>>
> > >>> Silver epoxy is still around. We used it to seal microwave modules
> > >>> prior to going in the oven were it was cured and the modules then
> > >>> final tested and shipped.
> > >>>
> > >>> Carl
> > >>> KM1H
> > >>>
> > >>>
> > >>> ----- Original Message -----
> > >>> From: "Herzog" <herzog@frontiernet.net>
> > >>> To: "Ham-amps" <amps@contesting.com>
> > >>> Sent: Wednesday, May 27, 2009 9:16 PM
> > >>> Subject: [Amps] Silver epoxy yes
> > >>>
> > >>>
> > >>>
> > >>>> RE: n Wed, May 27, 2009 at 10:44:44AM -0500, Roy wrote:
> > >>>>
> > >>>>>> "The piece that broke off fits into a well about 1/2" deep.
> No iron
> > >>>>>>
> > >>>> I have
> > >>>>
> > >>>>>> will reach it."
> > >>>>>>
> > >>>>>> 73, Dick, W1KSZ
> > >>>>>>
> > >>>> =========
> > >>>> 25 years ago, there was a silver epoxy, that is silver particles in
> > >>>> the mix. We had a broken capacitor like that, and a brighit tech
> > >>>> tried "epoxy-ing" it. The thing worked. It had poor clading as
> > >>>> built, hence the failure. It carried 100 amperes RF at 30 MHz. I
> > >>>> am still amazed. K2LB
> > >>>> _______________________________________________
> > >>>> Amps mailing list
> > >>>> Amps@contesting.com
> > >>>> http://lists.contesting.com/mailman/listinfo/amps
> > >>>>
> > >>> _______________________________________________
> > >>> Amps mailing list
> > >>> Amps@contesting.com
> > >>> http://lists.contesting.com/mailman/listinfo/amps
> > >>>
> > >>> _______________________________________________
> > >>> Amps mailing list
> > >>> Amps@contesting.com
> > >>> http://lists.contesting.com/mailman/listinfo/amps
> > >>>
> > >
> > > _______________________________________________
> > > Amps mailing list
> > > Amps@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/amps
> > >
> > >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|