Amps
[Top] [All Lists]

Re: [Amps] Silver epoxy yes

To: "Bill W5WVO" <w5wvo@cybermesa.net>, "Alex" <alexeban@gmail.com>, "'Herzog'" <herzog@frontiernet.net>, "'Ham-amps'" <amps@contesting.com>
Subject: Re: [Amps] Silver epoxy yes
From: "Carl" <km1h@jeremy.mv.com>
Date: Fri, 29 May 2009 09:34:29 -0300
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Thats because some lack the ability to do independent research and have to 
depend on others to answer the questions.

I suspect it all begins back in the "Why mommy" days.

Im not picking on anybody, this is a pretty much standard problem on most 
forums and subjects. Ive even seen flame wars break out when someone dared 
suggest the questioner try Google!

Carl
KM1H


----- Original Message ----- 
From: "Bill W5WVO" <w5wvo@cybermesa.net>
To: "Alex" <alexeban@gmail.com>; "'Carl'" <km1h@jeremy.mv.com>; "'Herzog'" 
<herzog@frontiernet.net>; "'Ham-amps'" <amps@contesting.com>
Sent: Thursday, May 28, 2009 11:34 PM
Subject: Re: [Amps] Silver epoxy yes


>I don't get it. Why not just Google "silver epoxy"? You get a ton of hits. 
>This stufff is easy to find.
> Bill W5WVO
>
> Alex wrote:
>> Try the Stepan Company. They used to manufacture a few kinds of
>> silver epoxy years ago
>> Alex   4Z5KS
>>
>> -----Original Message-----
>> From: amps-bounces@contesting.com
>> [mailto:amps-bounces@contesting.com] On Behalf Of Carl
>> Sent: Thursday, May 28, 2009 2:05 AM
>> To: Herzog; Ham-amps
>> Subject: Re: [Amps] Silver epoxy yes
>>
>> Silver epoxy is still around. We used it to seal microwave modules
>> prior to going in the oven were it was cured and the modules then
>> final tested and shipped.
>>
>> Carl
>> KM1H
>>
>>
>> ----- Original Message -----
>> From: "Herzog" <herzog@frontiernet.net>
>> To: "Ham-amps" <amps@contesting.com>
>> Sent: Wednesday, May 27, 2009 9:16 PM
>> Subject: [Amps] Silver epoxy yes
>>
>>
>>> RE: n Wed, May 27, 2009 at 10:44:44AM -0500, Roy wrote:
>>>>> "The piece that broke off fits into a well about 1/2" deep. No iron
>>> I have
>>>>> will reach it."
>>>>>
>>>>> 73, Dick, W1KSZ
>>> =========
>>> 25 years ago, there was a silver epoxy, that is silver particles in
>>> the mix.  We had a broken capacitor like that, and a brighit tech
>>> tried "epoxy-ing" it.  The thing worked.  It had poor clading as
>>> built, hence the failure.  It carried 100 amperes RF at 30 MHz.  I
>>> am still amazed. K2LB
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>