Thanks Gary, I have already shot them an email, I hope they get to it soon.
I am looking at my Radio Amateur's Handbook for the year 1977; they have a
formula for estimating the wattage capacity for an unknown transformer. You
multiply the area of the windings times the thickness of the laminated core and
compare the product to a graph for the answer.
Problem with the formula and the graph is that it only goes up to "4" being
about 500 watts while, I have a product of "35". It's kind of hard to
extrapolate the chart past the 1000 watt point.
Mel
--- On Sun, 7/20/08, Gary K9GS <garyk9gs@wi.rr.com> wrote:
From: Gary K9GS <garyk9gs@wi.rr.com>
Subject: Re: [Amps] Basler Electric Transformer
To: amps@contesting.com
Cc: itz_da_police@yahoo.com
Date: Sunday, July 20, 2008, 12:04 PM
Hi Mel,
Basler is alive and well in Highland, IL. I'll bet that a call to their
applications engineering people can get you what you need. Here's a link
to
their site:
http://www.basler.com/
73,
Gary K9GS
----- Original Message -----
From: "Mel" <itz_da_police@yahoo.com>
To: <amps@contesting.com>
Sent: Sunday, July 20, 2008 10:29 AM
Subject: [Amps] Basler Electric Transformer
Greetings,
I have a transformer labled "BE-9370". It was made by Basler
Electric, it
has a split 220 volt primary and a high voltage secondary.
The core dimensions are, L: 7.0 in., W: 7.0 in., D: 5.0 in.
The windings dimensions are, L: 9.5 in., W: 4.0 in., D: 7.0 in.
I am trying to find info on the secondary voltage/current rating and what
was the original application for this transformer. Any help would be
appreciated.
Thanks in advance,
Mel
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|