Hi Mel,
Basler is alive and well in Highland, IL. I'll bet that a call to their
applications engineering people can get you what you need. Here's a link to
their site:
http://www.basler.com/
73,
Gary K9GS
----- Original Message -----
From: "Mel" <itz_da_police@yahoo.com>
To: <amps@contesting.com>
Sent: Sunday, July 20, 2008 10:29 AM
Subject: [Amps] Basler Electric Transformer
Greetings,
I have a transformer labled "BE-9370". It was made by Basler Electric, it
has a split 220 volt primary and a high voltage secondary.
The core dimensions are, L: 7.0 in., W: 7.0 in., D: 5.0 in.
The windings dimensions are, L: 9.5 in., W: 4.0 in., D: 7.0 in.
I am trying to find info on the secondary voltage/current rating and what
was the original application for this transformer. Any help would be
appreciated.
Thanks in advance,
Mel
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|