I transposed the data on the core and winding dimensions:
These are the correct numbers
The WINDINGS dimensions are, L: 7.0 in., W: 7.0 in., D: 5.0 in.
The CORE dimensions are, L: 9.5 in., W: 4.0 in., D: 7.0 in.
--- On Sun, 7/20/08, Mel <itz_da_police@yahoo.com> wrote:
From: Mel <itz_da_police@yahoo.com>
Subject: [Amps] Basler Electric Transformer
To: amps@contesting.com
Date: Sunday, July 20, 2008, 11:29 AM
Greetings,
I have a transformer labled "BE-9370". It was made by Basler
Electric, it has a split 220 volt primary and a high voltage secondary.
The WINDINGS dimensions are, L: 7.0 in., W: 7.0 in., D: 5.0 in.
The CORE dimensions are, L: 9.5 in., W: 4.0 in., D: 7.0 in.
I am trying to find info on the secondary voltage/current rating and what was
the original application for this transformer. Any help would be appreciated.
Thanks in advance,
Mel
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|